Assessment of Residue Approach & Geometric approach to Select Wide-Area Signals for Power System Damping Control
نویسنده
چکیده
In this paper, two different approaches are applied to the Kundur two-area four machines network in order to select the most effective signals to damped out the inter-area oscillations. The robustness analysis, simulations and different results show that in the case of wide-area signals selection, the geometric approach is more reliable and usefull the the residue approach.Also, the result conform that wide-area damping control scheme is more effective than local control for damping of inter-area oscillation.
منابع مشابه
Power Swings Damping Improvement with STATCOM and SMES Based on the Direct Lyapunov Method
In this paper a comprehensive approach is presented to improve power swings damping based on direct Lyapunov method. The approach combines superconducting magnetic energy storage (SMES) system with static synchronous compensator (STATCOM). Considering the energy absorption/injection ability of SMES, in transient states the combination exchanges both active and reactive powers with power system....
متن کاملFACTS Control Parameters Identification for Enhancement of Power System Stability
The aim of this paper is to investigate a novel approach for output feedback damping controller design ofSTATCOM in order to enhance the damping of power system low frequency oscillations (LFO). The design ofoutput feedback controller is considered as an optimization problem according with the time domain-basedobjective function which is solved by a honey bee mating optimization algorithm (HBMO...
متن کاملController Design of SSSC for power System Stability Enhancement
In this paper, a novel method is developed for designing the output feedback controller for Static Synchronous Series Compensator (SSSC). In the proposed method, the problem of selecting the output feedback gains for the SSSC controllers is changed into an optimization problem with a time domain-based objective function.Then, it is solved by using the particle swarm optimization (PSO) algorithm...
متن کاملController Design of SSSC for power System Stability Enhancement
In this paper, a novel method is developed for designing the output feedback controller for Static Synchronous Series Compensator (SSSC). In the proposed method, the problem of selecting the output feedback gains for the SSSC controllers is changed into an optimization problem with a time domain-based objective function.Then, it is solved by using the particle swarm optimization (PSO) algorithm...
متن کاملDesign Supplementary Controller Based on Stabilizing Effect of Delay for Damping Inter Area Oscillations in a Power System
The delay associated with signal transmission through the wide-area measurement system reduces the functionality of the power oscillation damping control system. One of the important issues is the poor operation of the supplementary controller against delay existence, which limits the efficiency of damping of ancillary equipment, such as SVCs in a power system. This paper as a solution proposes...
متن کامل