In Line Flow-meter Calibration
نویسندگان
چکیده
منابع مشابه
Re. Calibration of peak expiratory flow (PEF) measuring devices.
There are increasing numbers of devices coming onto the market for measuring PEP and of papers assessing their performance. In these papers a number of different ways of calibrating the devices have been used, as discussed in your correspondence columns [1]. What is the best way to calibrate a peak flow (PP) meter for clinical use? It seems not to be realized that compared with a large pneumota...
متن کاملCalibration of some Wright peak flow meters.
The performance of Wright peak flow meters is described using an absolute and precise calibration method. This showed errors as great as 25% with the peak flow meter and 40% with the mini peak flow meter. At large flow rates errors were less. The expected variation between individual peak flow meters was about 12%. The expected variation between individual mini peak flow meters was between 16% ...
متن کاملAn in - Situ Verification Technology for Coriolis Flowmeters
Structural Integrity Meter Verification is a robust new Coriolis verification technology which uses the onboard electronics to very accurately measure the stiffness of the flowtubes. The flow tube stiffness is directly related to the flow calibration factor and is uninfluenced by process conditions. Meter Verification compares the measured stiffness to the factory baseline stiffness to confirm ...
متن کاملWater Velocity Measurements in Open Channels Using Volumetric Current Meter (VCM)
An innovative Volumetric Current Meter (VCM) was designed in order to allow quick velocity measurements in open channels. At first, the coefficient of velocity (Cv) of the device was determined through calibration under different water velocities in the laboratory. The measurement performance was verified by measurements performed in similar flows in irrigation channels using an ordinary curren...
متن کاملAn 8-path Ultrasonic Master Meter for Oil Custody Transfers
This paper describes an 8-path ultrasonic flow meter, with emphasis on how this meter can be used as a master meter with traceability to appropriate standards. In particular the paper describes the methodology whereby transit time measurements and calibration factors can be established in factory and laboratory tests and then verified in the field. Simulations of distorted and swirling flows, a...
متن کامل