Experimental Realization of Extreme Heat Flux Concentration with Easy-to-Make Thermal Metamaterials
نویسندگان
چکیده
The ability to harvest thermal energy and manipulate heat fluxes has recently attracted a great deal of research interest because this is critical to achieve efficient solar-to-thermal energy conversion in the technology of concentrated solar thermal collectors. Thermal metamaterials with engineered thermal conduction are often utilized to control the diffusive heat flow in ways otherwise not possible with naturally occurring materials. In this work, we adopt the transformation thermodynamics approach to design an annular fan-shaped thermal metamaterial which is capable of guiding heat fluxes and concentrating thermal energy to the central region of the metamaterial device without disturbing the temperature profile outside the structure--a fascinating and unique feature impossibly achieved with homogeneous materials. In experiment, this rationally-designed metamaterial structure demonstrates extreme heat flux compression from both line-shaped and point thermal sources with measured concentration efficiency up to 83.1%, providing the first experimental realization of our recent theoretical prediction (T. Han et al., Energy Environ. Sci., 2013, 6, 3537-3541). These unprecedented results may open up new possibilities for engineering thermal materials with desired properties that can be used for dramatically enhancing the efficiency of the existing solar thermal collectors.
منابع مشابه
Tunable Multifunctional Thermal Metamaterials: Manipulation of Local Heat Flux via Assembly of Unit-Cell Thermal Shifters
Thermal metamaterials, designed by transformation thermodynamics are artificial structures that can actively control heat flux at a continuum scale. However, fabrication of them is very challenging because it requires a continuous change of thermal properties in materials, for one specific function. Herein, we introduce tunable thermal metamaterials that use the assembly of unit-cell thermal sh...
متن کاملExperimental measurement of heat transfer coefficient and mass of deposited CaSO4 in subcooled flow boiling condition
Fouling is a common, fundamental and costly problem in heat transfer systems, which reduces thermal efficiency of equipment, increases the energy loss and causes strong damage to the heat transfer equipment in various industries. The main causes of fouling on the heat transfer surfaces are salts with inverse temperature-solubility in the fluid which calcium sulfate is one of the most important ...
متن کاملExperimental investigation of thermal and electrical performances of a nanofluid-cooled photovoltaic/thermal system equipped with a sheet-and-grooved serpentine tube collector
Introduction: In the present experimental investigation, the thermal and electrical performances of a photovoltaic/thermal system equipped with a sheet-and-grooved serpentine tube collector are investigated. The water-magnetite nanofluid is used as the heat transfer fluid. The effect of nanoparticle volume concentration (0-1%), nanofluid mass flow rate (10-40 kg/h) and groove pitch (0, 0.54 an...
متن کاملExperimental demonstration of a bilayer thermal cloak.
Invisibility has attracted intensive research in various communities, e.g., optics, electromagnetics, acoustics, thermodynamics, dc, etc. However, many experimental demonstrations have only been achieved by virtue of simplified approaches due to the inhomogeneous and extreme parameters imposed by the transformation-optic method, and usually require a challenging realization with metamaterials. ...
متن کامل