Qualitative Study of a Robot Arm as a Hamiltonian System
نویسندگان
چکیده
Abstract A double pendulum subject to external torques is used as a model to study the stability of a planar manipulator with two links and two rotational driven joints. The hamiltonian equations of motion and the fixed points (stationary solutions) in phase space are determined. Under suitable conditions, the presence of constant torques does not change the number of fixed points, and preserves the topology of orbits in their linear neighborhoods; two equivalent invariant manifolds are observed, each corresponding to a saddle-center fixed point.
منابع مشابه
A New Type-2 Fuzzy Systems for Flexible-Joint Robot Arm Control
In this paper an adaptive neuro fuzzy inference system based on interval Gaussian type-2 fuzzy sets in the antecedent part and Gaussian type-1 fuzzy sets as coefficients of linear combination of input variables in the consequent part is presented. The capability of the proposed method (we named ANFIS2) to function approximation and dynamical system identification is shown. The ANFIS2 structure ...
متن کاملThe reduction coefficient of PID controller by using PSO algorithm method for Flexible single-arm robot system
This study on the design of PID controllers for flexible single-arm robot system optimizationPSO method is focused so that the coefficients of the PID controller are reduced. In this study,PID controller and PSO algorithm have been described and then by using MATLAB, PIDcontrol was simulated. Then by PSO algorithm, attempts to reduce the PID coefficients are givenby simulation. Finally PID coef...
متن کاملThe Kinematic Analysis Of Four Degrees Of Freedom For A Medical Robot And Control It By Labview And Arduino Mega2560 (Simulation And Implementation)
ABSRACTThis study presents the kinematic analysis of a four-degree freedom medical robotic arm using the Matlab and the robotic-tool, the arm was designed using a solid work program, As well as details of the control of the real design of this arm using Arduino Mega 2560, The specialist enters the position to be reached by the automatic arm (injection position), Or moving the arm to any p...
متن کاملAn Adaptive-Robust Control Approach for Trajectory Tracking of two 5 DOF Cooperating Robot Manipulators Moving a Rigid Payload
In this paper, a dual system consisting of two 5 DOF (RRRRR) robot manipulators is considered as a cooperative robotic system used to manipulate a rigid payload on a desired trajectory between two desired initial and end positions/orientations. The forward and inverse kinematic problems are first solved for the dual arm system. Then, dynamics of the system and the relations between forces/momen...
متن کاملDesign and Analysis of a Novel Tendon-less Backbone Robot
A new type of backbone robot is presented in this paper. The core idea is to use a cross shape mechanism with the principle of functioning of the scissors linkages, known as a pantograph. Although this continuum arm acts quite similar to tendon-driven robot, this manipulator does not include any tendon in its structure. This design does not suffer from the weaknesses of the continuum design suc...
متن کاملDesigning Path for Robot Arm Extensions Series with the Aim of Avoiding Obstruction with Recurring Neural Network
In this paper, recurrent neural network is used for path planning in the joint space of the robot with obstacle in the workspace of the robot. To design the neural network, first a performance index has been defined as sum of square of error tracking of final executor. Then, obstacle avoidance scheme is presented based on its space coordinate and its minimum distance between the obstacle and ea...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- CoRR
دوره cs.RO/0212027 شماره
صفحات -
تاریخ انتشار 2002