Hardware Simulation of Active Lane Keeping Assist Based on Fuzzy Logic
نویسنده
چکیده
Accidents due to cross the lane (lane departure crash) of achieving 19% of all accidents. These accidents mostly caused because the driver is not concentrating or dozing. A device that can help the driver so that the vehicle does not exit lanes known as Active Lane Keeping Assist (ALKA). ALKA is a subsystem of Advanced Driver Assistance System (ADAS) and is now used in several brands of cars namely Audi, BMW, and Ford. ALKA useful to help the driver, especially on roads with monotonous situations such as toll roads. This paper presents the development of fuzzy logic-based algorithm for ALKA. A battery toy car is used as a hardware simulation to test the algorithm in real time situation. The test results at three different speeds are slow, medium, and high indicate that the algorithm can work according to design.
منابع مشابه
Optimized Fuzzy Logic for Nonlinear Vibration Control of Aircraft Semi-active Shock Absorber with Input Constraint (TECHNICAL NOTE)
Landing impact and runway unevenness have proximate consequence on performance of landing gear system and conduce to discomfort of passengers and reduction of the pilot’s capability to control aircraft. Finally, vibrations caused by them result in structure fatigue. Fuzzy logic controller is used frequently in different applications because of simplicity in design and implementation. In the pre...
متن کاملAN OPTIMAL CUCKOO SEARCH-FUZZY LOGIC CONTROLLER FOR OPTIMAL STRUCTURAL CONTROL
An optimal semi-active Cuckoo- Fuzzy algorithm is developed to drive the hydraulic semi-active damper for effective control of the dynamic deformation of building structures under earthquake loadings, in this paper. Hydraulic semi-active dampers (MR dampers) are semi active control devices that are managed by sending external voltage supply. A new adaptive fuzzy logic controller (FLC) is introd...
متن کاملSIMULATION AND MONITORING OF THE MACHINING PROCESS VIA FUZZY LOGIC AND CUTTING FORCES
On time replacement of a cutting tool with a new one is an important task in Flexible Manufacturing Systems (FMS). A fuzzy logic-based approach was used in the present study to predict and simulate the tool wear progress in turning operation. Cutting parameters and cutting forces were considered as the input and the wear rate was regarded as the output data in the fuzzy logic for construct...
متن کاملFuzzy Control of Fuel Cell Distributed Generation Systems
The operation of Fuel Cell Distributed Generation (FCDG) systems in distribution systems is introduced by modeling, controller design, and simulation study of a Solid Oxide Fuel Cell (SOFC) distributed generation (DG) system. The physical model of the fuel cell stack and dynamic models of power conditioning units are described. Then, suitable control architecture based on fuzzy logic contro...
متن کاملDevelopment of Driver Model for Lane Keeping Manoeuvre
This paper presents a 9-degree of freedom (9-DOF) vehicle model combined with a closed-loop driver model for the purpose of developing vehicle lateral control. The driver model was developed to control the steering angle and uses a lookup table path as a reference for the control input. The proposed driver model for the outer-loop controllers are combination of proportional-integral (PI) contro...
متن کامل