Cr(1/3)Zr₂P₃O₁₂ with unusual tetrahedral coordination of Cr(III): peculiarities of the formation, thermal stability and application as a pigment.

نویسندگان

  • Nataliia Gorodylova
  • Veronika Kosinová
  • Petra Šulcová
  • Petr Bělina
  • Milan Vlček
چکیده

All the known chromium(III) NASICON-related phosphates are considered to be solid solutions. In these compounds chromium atoms share their position in the basic framework of the crystal lattice with other structure forming elements such as zirconium. In our study, we have hypothesised a completely new way of structural organisation of the chromium(III) zirconium(IV) NASICON framework, consisting in the distribution of chromium over the charge-compensating atom sites with tetrahedral oxygen coordination. The possibility of formation of the corresponding phosphate, Cr(1/3)Zr2P3O12, was studied using a classical ceramic route and a sol-gel method. Structural affiliation of the obtained pure phase product was studied using XRD analysis. The results confirmed that the Cr(1/3)Zr2P3O12 phosphate belongs to monoclinic SW-subtype of the NASICON family. In this structure, chromium atoms occupy charge-compensating sites with a strongly distorted tetrahedral oxygen environment. To the best of our knowledge, it is the first example of tetrahedral coordination of chromium(III) in phosphates. Along with the unusual crystallographic characteristics of chromium, special attention in this paper is devoted to the thermal stability of this phosphate and to its performance as an inorganic pigment. The sample was characterised by heating microscopy and DTA study, particle size distribution analysis, and IR- and VIS-spectroscopy. The stability of the obtained powder in a glaze environment, its colouring performance and lightfastness are discussed as well.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Shape Selective Pillared Clay Catalysts for P-Xylene Production

Shape selective xylene production is very important in the polymer industry because of its extensive use as raw material for monomer preparation. The acidity associated with the Lewis and Broensted centers present in the pillars interlayered clay and its textural properties allows good catalytic activity and shape selectivity toward p-xylene production. So, in the present study, ultrasonic and ...

متن کامل

Application of a dioxime-PVC electrode to potentiometric studies of Cr(III) ion

A PVC membrane Cr(III) ion selective electrode has been constructed using 2H-1,4-benzothioazine-2,3(4H)dione dioxime (BTD) as membrane carrier. The influence of membrane composition on the electroderesponse was studied. The electrode exhibits a Nernstian response over a Cr(III) concentration range of 1.0 x10 6 to 1.0>< 10-1 M (r = 0.99) with a slope of 19.5 ± 0.5 mV per decade of concentration,...

متن کامل

Synthesis and Characterization of Cr(III), Mn(III), Fe(III), VO(IV), Zr(IV) and UO2(VI) Complexes of Schiff Base Derived from Isonicotinoyl Hydrazone

2-hydroxy-5-chloro-3-nitroacetophenone isonicotinoyl hydrazone as a Schiff base ligand and its complexes with Cr(III), Mn(III), Fe(III), VO(IV), Zr(IV) and UO2(VI) metal ions have been synthesized. The ligands as well as their metal complexes were well characterized using various physicochemical techniques such as elemental analyses, molar conductance measurements, magnetic measurements, therma...

متن کامل

Synthesis and crystal structure compound Adeninium Bis(pyridine-2,6-dicarboxylate) Chromate(III) pyridine-2,6-dicarboxylic acid tetra hydrate

A new supramolecular compound of adeninium bis(pyridine-2,6-dicarboxylate) Chromate(III) pyridine-2,6-dicarboxylic acid tetrahydrate (AdH+)[Cr(pydc)2](H2pydc).4H2O (1) (where Ad and H2pydc are adenine and pyridine-2,6-dicarboxylic acid, respectively) was synthesized via proton transfer method and its structure was determined using single crystal X-ray diffraction technique. This compound crysta...

متن کامل

Optimization of micro hardness of nanostructure Cu-Cr-Zr alloys prepared by the mechanical alloying using artificial neural networks and genetic algorithm

Cu–Cr-Zr alloys had wide applications in engineering applications such as electrical and welding industrial especially for their high strength, high electrical as well as acceptable thermal conductivities and melting points. It was possible to prepare the nano-structure of these age hardenable alloys using mechanical alloying method as a cheap and mass production technique to prepare the non-eq...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Dalton transactions

دوره 43 41  شماره 

صفحات  -

تاریخ انتشار 2014