Visualizing the Structural Evolution of LSM/xYSZ Composite Cathodes for SOFC by in-situ Neutron Diffraction
نویسندگان
چکیده
Thermal stability of composite cathodes for solid oxide fuel cells, the mixtures of (La0.8Sr0.2)0.95MnO(3-δ) (LSM) and (Y2O3)(x)(ZrO2)(1-x) (xYSZ, x = 3, 6, 8 and 10), is determined using in-situ neutron diffraction. Thanks to the most advanced high flux neutron source, our work highlights the visualization of the phase evolutions in heterogeneous material systems at high temperatures, along with the analysis of the diffusion activities of transition metal ions that reveal the reaction mechanism and kinetics. It is found that the tetragonal-to-cubic phase transition in YSZ at T > 900°C leads to a heterogeneous redistribution of Mn ions. The subsequent reaction of LSM and YSZ occurring at T > 1100°C is revealed as a three-stage kinetic process, yielding La2Zr2O7, SrZrO3 and MnO. The diffusion activities of Y, Mn and La ions in the heterogeneous systems at elevated temperatures are derived by the structural analysis, and the three-stage reaction of YSZ and LSM is found strongly correlated to ions' behaviors as functions of temperature.
منابع مشابه
Effect of temperature on kinetics of the hydrogen evolution reaction on Ni-P-C cathodes in alkaline solution
The kinetics of hydrogen evolution reaction (HER) was studied in 1M NaOH at various temperatures (298 to 358 K) on Ni-P-C (composite electrodes. The electrochemical efficiency of the electrodes has been evaluated on the basis of electrochemical data obtained from the steady-state polarization Tafel curves, electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV) in 1M NaOH solut...
متن کاملEffect of the Ionic Conductivity of the Electrolyte in Composite SOFC Cathodes
Solid oxide fuel cell (SOFC) cathodes were prepared by infiltration of 35 wt % La0.8Sr0.2FeO3 (LSF) into porous scaffolds of three, zirconia-based electrolytes in order to determine the effect of the ionic conductivity of the electrolyte material on cathode impedances. The electrolyte scaffolds were 10 mol % Sc2O3-stabilized zirconia (ScSZ), 8 mol % Y2O3-stabilized zirconia (YSZ), and 3 mol % Y...
متن کاملNew Rhenium-Doped SrCo1−xRexO3−δ Perovskites Performing as Cathodes in Solid Oxide Fuel Cells
In the aim to stabilize novel three-dimensional perovskite oxides based upon SrCoO3-δ, we have designed and prepared SrCo1-xRexO3-δ phases (x = 0.05 and 0.10), successfully avoiding the competitive hexagonal 2H polytypes. Their performance as cathode materials in intermediate-temperature solid oxide fuel cells (IT-SOFC) has been investigated. The characterization of these oxides included X-ray ...
متن کاملA Comparison of LSM, LSF, and LSCo for Solid Oxide Electrolyzer Anodes
Composite electrodes of yttria-stabilized zirconia (YSZ) with La0.8Sr0.2MnO3 (LSM), La0.8Sr0.2FeO3 (LSF), and La0.8Sr0.2CoO3 (LSCo) were prepared and tested as solid oxide electrolyzer (SOE) anodes and solid oxide fuel cell (SOFC) cathodes at 973 K, using cells with a YSZ electrolyte and a Co-ceria-YSZ counter electrode. The LSM-YSZ electrode was activated by cathodic polarization but the enhan...
متن کاملThe Effect of cathode Porosity on Solid Oxide Fuel Cell Performance
In the present study, the effect of porosity on the cathode microstructure (50:50 wt. % LSM: YSZ) of a Solid Oxide Fuel Cell (SOFC) has been examined. A 3-D finite element method for Mixed Ionic and Electronic Conducting Cathodes (MIEC) is presented to study the effects of porosity on cell performance. Each microstructure was realized using the Monte Carlo approach with the isotropic type o...
متن کامل