Enhancing the catalytic performance of Pt/C catalysts using steam-etched carbon blacks as a catalyst support
نویسندگان
چکیده
XC72 carbon blacks were treated using a steam-etching technique. Pt catalysts using steam-etched carbon blacks (SECBs) as supports were developed for oxygen reduction reactions in polymer electrolyte fuel cells (PEFCs). The use of the steam-etched carbon blacks as a catalyst support can improve the dispersion uniformity of Pt nanoparticles on the surface of the support and can decrease the Pt particle size, as indicated by transmission electron microscopy (TEM) data. The overall catalytic performance of the catalysts using SECBs was better than that of the catalysts using non-SECBs. The mass activity of the Pt catalysts using SECBs etched for 1 h had the best catalytic performance for both the catalysts using SECBs and those using non-SECBs. In addition, the electrochemically active surface area of the Pt/SECBs significantly increased after etching. TEM results revealed that the center of the carbon black was more easily etched than the surface. 2010 Elsevier Ltd. All rights reserved.
منابع مشابه
An Investigation into the Effect of Hydrotalcite Calcination Temperature on the Catalytic Performance of Mesoporous Ni-MgO-Al2O3 Catalyst in the Combined Steam and Dry Reforming of Methane
Several mesoporous nickel-based catalysts with MgO-Al2O3 as the catalyst support were prepared using a co-precipitation method at a constant pH. The supports were prepared from the decomposition of an Mg-Al hydrotalcite-like structure which had already been prepared with Mg/Al=1. Prior to impregnating 10 wt.% nickel on the supports, the precursor was decomposed at several ...
متن کاملEffect of Pt on Zn-Free Cu-Al Catalysts for Methanol Steam Reforming to Produce Hydrogen
Steam reforming of methanol can be considered as an attractive reaction aiming at hydrogen production for PEM fuel cells. Although Cu/Al-contained catalysts are considerably evaluated in this reaction, further evaluation is essential to evaluate the impact of some promoters like Pt in order to find a comprehensively optimized catalyst. Pt promoter is employed with different methods in this ...
متن کاملIntroducing Pt/ZnO as a new non carbon substrate electro catalyst for oxygen reduction reaction at low temperature acidic fuel cells
Gas diffusion electrode was used for providing better conditions in fuel cell systems for oxygen reduction reaction (ORR). Because the slow kinetics of the oxygen reduction reaction at the proton exchange membrane fuel cell cathode restricts fuel cell efficiency. To this end, researchers have used platinum-coated carbon. In the present study, due to the reduction of carbon corrosion, Zinc oxide...
متن کاملIntroducing Pt/ZnO as a new non carbon substrate electro catalyst for oxygen reduction reaction at low temperature acidic fuel cells
Gas diffusion electrode was used for providing better conditions in fuel cell systems for oxygen reduction reaction (ORR). Because the slow kinetics of the oxygen reduction reaction at the proton exchange membrane fuel cell cathode restricts fuel cell efficiency. To this end, researchers have used platinum-coated carbon. In the present study, due to the reduction of carbon corrosion, Zinc oxide...
متن کاملHydrogen production via steam reforming of LPG on Ni/Zeolite catalysts
Steam reforming is one of the most important processes for producing hydrogen from hydrocarbon fuels such as LPG and has attracted much attention due to its high efficiency and economy. In this study, the LPG steam reforming reaction was investigated on nickel catalysts supported on four various zeolites (H-Y, Na-Y, HZSM5 and Ferrierite). The catalytic tests were performed in a tubular fixed be...
متن کامل