Microstructural stability during cyclic loading of multilayer copper/copper samples with nanoscale twinning
نویسندگان
چکیده
The response to cyclic deformation has been studied for Cu/Cu multilayer material consisting of columns of closely spaced, parallel nanotwins. The fatigue life under stress-controlled cycling is greatly improved over that of coarse-grained Cu. Nanotwinning provides significant strengthening, which is unchanged by fatigue or severe compression. Observations by focused ion beam microscopy showed that the microstructure is quite stable under deformation. Localized deformation from indentation produced shear bands and apparently some loss of nanotwinned area but no decrease in hardness. 2008 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
منابع مشابه
Large - scale production of nano - twinned , ultrafine - grained copper
Large-scale production of high purity (99.999%), nano-twinned, and ultrafine-grained copper foils (22 m thick) was successfully implemented by the use of nanoscale multilayer technology. The process allows the production of up to fourteen 10 cm diameter foils during a single deposition run with high levels of reproducibility. Mechanical tests demonstrate that the strength of the Cu foils (σy ∼ ...
متن کاملSynthesis and Characterization of Nano-Structure Copper Oxide From Two Different Copper (II) Metal-Organic Framework Precursors
Nano-structured copper oxides were successfully prepared through direct calcination of 1D ladderlike metal-organic framework [Cu2(btec)(2,2'-bipy)2]∞, (btec = 1,2,4,5-benzenetetracarboxylate and 2,2'-bipy = 2,2'-bipyridine) and porous coordination polymer [Cu(BDC)(bipy)](BDCH2), (BDC = 1,4-benzenedicarboxylate; bipy = 4,4'-bipyridine). The nano-structure of the as-synthesized samples are charac...
متن کاملEqual Channel Angular Pressing to Produce Ultrafine Pure Copper with Excellent Electrical and Mechanical Properties
In this article, commercially pure copper samples were severely deformed by equal channel angular pressing (ECAP) up to eight passes at room temperature. The effects of severe plastic deformation on the microstructure, mechanical properties, and electrical conductivity of the copper were investigated. The microstructure evolution was followed by optical microscope and field emission scanning el...
متن کاملDeformation mechanisms to ameliorate the mechanical properties of novel TRIP/TWIP Co-Cr-Mo-(Cu) ultrafine eutectic alloys
In the present study, the microstructural evolution and the modulation of the mechanical properties have been investigated for a Co-Cr-Mo (CCM) ternary eutectic alloy by addition of a small amount of copper (0.5 and 1 at.%). The microstructural observations reveal a distinct dissimilarity in the eutectic structure such as a broken lamellar structure and a well-aligned lamellar structure and an ...
متن کاملDissipation Measurements during Ultrasonic Fatigue Tests
The aim of this paper is to analyse the dissipation observed during dynamic fatigue loading at low stress range and high number of cycles. Infrared thermographic techniques were developed to estimate the mean dissipation per cycle. Results derived from tests performed at high loading frequency on pure copper specimens showed a drift of dissipative regimes incompatible with concepts of fatigue l...
متن کامل