Active Suspension Control of Ground Vehicle Heave and Pitch Motions
نویسندگان
چکیده
Ride quality depends on a combination of vertical displacement (heave) and angular displacement (pitch). Road irregularities are the main factor affecting ride comfort. Suspension elements between the road wheels and the vehicle body generate vertical forces which excite both heave and pitch motions. An active controller design based on time-scale separation and an "input decoupling transformation" is given. It is shown to give better performance that conventional passive suspension control. *Research supported by ARO Grant 39657-MA and Davis Technologies International, Inc. Email: [email protected].
منابع مشابه
Nonlinear Control of Full-Vehicle Active Suspensions with Backstepping Design Scheme
Abstract: This paper proposes a nonlinear backstepping control strategy to improve the inherent tradeoff between ride comfort of passengers and suspension travel. Passenger comfort in ground vehicles usually depends on a combination of vertical motion (heave) and angular motion (pitch and roll). Suspension travel means the space variation between vehicle body and tires. Our active suspension de...
متن کاملAdaptive B-Spline Based Neuro-Fuzzy Control for Full Car Active Suspension System
The main role of a car suspension system is to improve the ride comfort and road holding. The traditional spring-damper suspension is currently being replaced by either a semi-active or active suspension system, because, passive suspension system cannot give better ride comfort and handling property. In order to improve the capability of active suspension systems, a robust Adaptive B-spline Neu...
متن کاملHalf Car Suspension System Integrated With PID Controller
In this paper, modeling and simulation of nonlinear, Half-car Active Vehicle Suspension System (HAVSS) reinforced with PID controller is presented. The model has 4 degrees of freedom; comprising of heave movements of the front and rear axle, pitch and heave motions of the unsprung mass of the vehicle. The vehicle is excited by a triangular bump on an otherwise smooth road. The objective of the ...
متن کاملOnline Adaptive Neuro - Fuzzy Based Full Car Suspension Control Strategy
Suspension system of a vehicle is used to minimize the effect of different road disturbances for ride comfort and improvement of vehicle control. A passive suspension system responds only to the deflection of the strut. The main objective of this work is to design an efficient active suspension control for a full car model with 8-Degrees Of Freedom (DOF) using adaptive soft-computing technique....
متن کاملPid Controller with Roll Moment Rejection for Pneumatically Actuated Active Roll Control (Arc) Suspension System
This chapter presents a successful implementation of PID controller for a pneumatically actuated active roll control suspension system in both simulation and experimental studies. For the simulation model, a full vehicle model which consists of ride, handling and tire subsystems to study vehicle dynamics behavior in lateral direction is derived. The full vehicle model is then validated experime...
متن کامل