Effect of silanes as crosslinking agent with the NBR rubber

نویسندگان

  • Sunil padhiyar
  • Darshan Shah
چکیده

Silane coupling agent generally use as improve the properties of white filler use in rubber compound for better dispersion. Also silane coupling agent reacts with organic filler & polymer chain as crosslink. Here in this research study the crosslink density & swelling phenomena of silane participate in vulcanization process with Nitrile rubber compound. Also show the comparisons of carbon filled and silica filled NBR rubber compound crosslink density property. Silanes increase the viscosity of compound, crosslink density with low swlling resistance.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Degradation of acrylonitrile butadiene rubber and fluoroelastomers in rapeseed biodiesel and hydrogenated vegetable oil

III To my mother and father IV ABSTRACT Biodiesel and hydrotreated vegetable oil (HVO) are currently viewed by the transportation sector as the most viable alternative fuels to replace petroleum-based fuels. The use of biodiesel has, however, been limited by the deteriorative effect of biodiesel on rubber parts in automobile fuel systems. This work therefore aimed at investigating the degradati...

متن کامل

Improved curing conditions and mechanical/chemical properties of Nitrile Butadiene Rubber Composites Reinforced with Carbon Based Nanofillers

Multiwall carbon nanotubes (MWCNTs) and carbon nanofibers (CNFs) with contents ranging from 1 to 10 phr (part per hundred parts of rubber) were selected and then characterized to reinforce acrylonitrile butadiene rubber (NBR) based composites. Fabrication of nanocomposites were done by a novel procedure and structural analysis along with variety of mechanical and chemical tests, according to th...

متن کامل

Emulsion Copolymerization of Acrylonitrile and Butadiene in an Industrial Reactor. Mathematical Modeling, Estimation, and Control of Polymer Quality Variables on the Basis of Calorimetric Measurements

−− An industrial emulsion copolymerization of acrylonitrile and butadiene carried out in a batch (or semibatch) reactor for the production of nitrile rubber (NBR) is investigated. The effect of variable amounts of deactivating impurities on the predictions of a global polymerization model is analyzed; and the advantages of using the model predictions in combination with on-line calorimetric mea...

متن کامل

‌تأثیر سوخت های JP-10 و DMAZ بر اصطکاک لاستیک نیتریل و آلومینیوم با زبری های مختلف

One of the problems for use of rubber in various industries is surface tension at the surface of rubbers, which results in the crack on the surface, fracture of the rubber and reduces its life. These tensions are caused by contacting the rubber component with the metal surface and the friction between two surfaces. Roughness of the surface, the composition of the rubber compound, the environmen...

متن کامل

Damping Behavior of the Phenolic Based Composite Friction Materials Containing Thermoplastic Elastomers (TPEs)

Attempts have been made for the first time to produce a friction material with thermal sensitive modulus by the inclusion of combined plastic/rubber properties of thermoplastic elastomers (TPE) as viscoelastic polymeric materials into the formulation for the purpose of increasing the damping behavior. In order to evaluate the viscoelastic parameters such as loss factor (tan δ) and elastic m...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2013