The Effect of Profile of Backing Plate Upon the Fatigue Life of a Cantilever Discharge Valve Reed
نویسندگان
چکیده
منابع مشابه
The Dynamic Behavior of Valve Reeds in Receiprocating Gas Compressors - Experimental Study
An experimental investigation was made of the dynamic behaviour of a valve reed when subjected to a cyclically varying pressure difference across it. Displacement at points on the reed were obtained by a Wayne Kerr displacement transducer: a Kistler piezo-electric transducer was used to measure the pressure-time history across the valve. There was good agreement between the experimental values ...
متن کاملLow Cycle Fatigue Simulation of Valve Bridge Region in Cylinder Head Based on Critical Plane Model
The reason of this study is low cycle failure of cast iron cylinder head during the E5 standard durability test. The goal of the present investigation is durability test simulation and low cycle fatigue life evaluation of cast iron cylinder head. With uncouple structural analysis, preloads, thermal and mechanical load and boundary conditions are prescribed to finite element model of the cylinde...
متن کاملPredicting Low Cycle Fatigue Life through Simulation of Crack in Cover Plate Welded Beam to Column Connections
This paper presents a low cycle fatigue life curve by simulating a crack in a cover plate welded moment connection. Initiation of ductile fracture in steel is controlled by growth and coalescence of micro-voids. This research used a numerical method using finite element modeling and simulation of ductile crack initiation by a micromechanical model. Therefore, a finite element model of a cover p...
متن کاملExperimental Investigation and Numerical Prediction of Fatigue Life in Force Fitted Fastener Holes
In this paper, the effect of interference fit on fatigue life of holed plate of mechanical joints was investigated experimentally. Fatigue tests were carried out on the holed specimens of Al-alloy 7075-T6 alloy. The interference fit process consists of force fitting a fastener into the hole with a negative clearance (diameter of the fastener is larger than of the hole) that produces beneficial ...
متن کاملBending Fatigue Failures of Compressor Valve Reeds
Bending fatigue failures OI cantilever type suction valve reeds occurred under operating conditions in a semi-hermetic refrigerant compressor during field trials. The finite element method (FEM) was applied to predict both the static and dynamic displacements and the resultant stresses of the reeds. The dynamic stresses in the location of the fracture exceeded the fatigue limit of the reed stee...
متن کامل