5.2: Field-Sequential-Color LCDs Based on Transient Modes

نویسندگان

  • Y. W. Li
  • L. Tan
  • H. S. Kwok
چکیده

A new configuration called stressed splay twist (SST) mode is proposed. Such device has much stronger transient effect than conventional TN mode. By using this dynamic approach, the true steady state-to-steady state response time of the liquid crystal can be ignored. The transient response time is used, in conjunction with the pulsed light source. A QVGA FSC displays prototype using SST mode is demonstrated.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Chromatic parameter space representation of LCD operating modes

A chromatic parameter space (CPS) representation is proposed to represent the operation of LCDs. Both chrominance and luminance are visualized in the CPS diagrams. All the usual display modes, both transmissive and reflective, such as TN, ECB, OMI, STN, and SBE are shown clearly on the diagrams. Two designs with the help of CPS are proposed and demonstrated: multicolor STN and a novel fully-com...

متن کامل

Emerging LCDs Based on the Kerr Effect

is a type of quadratic electro-optic effect caused by an electrical-field-induced ordering of polar molecules in an optically transparent and isotropic medium. Liquid-crystal displays (LCDs) based on the Kerr effect are now emerging because they exhibit the following three distinct advantages: (1) the fabrication process is simple and cost-effective because it does not require any alignment lay...

متن کامل

A Nematic LCD with Submillisecond Gray-to-gray Response Time

We propose a triode structure for achieving submillisecond grayto-gray response time in a double fringing-field-switching (DFFS) cell. The bright and dark states are obtained by applying a fringing field and a vertical field, respectively. The simulated averaged grayscale rise time is 793 μs and decay time is 478 μs. This triode DFFS mode enables conventional nematic LCDs for color sequential d...

متن کامل

Liquid Crystals for Electro-optic Applications

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 1. Electro-Optic Response of Liquid Crystals . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2. The Liquid Crystalline State . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 3. Physical Properties of Liquid Crystals . . . . . . . . . . . . . . . . . . . . . . ....

متن کامل

Creating Low-Cost Intelligent Display Modules With an FPGA and Embedded Processor

LCDs are fast becoming a standard part of the automotive interior. As demand for LCD technology increases, so do methodologies for controlling and creating the displayed graphical content. Traditionally, character-based LCDs and vacuum florescent (VF) displays have been used for low-cost automotive infotainment applications, but low-cost color thin film transistors (TFTs) quickly are becoming a...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2008