Ambient wind energy harvesting using cross-flow fluttering
نویسندگان
چکیده
In this experimental study, we propose and test a bioinspired piezo-leaf architecture which converts wind energy into electrical energy by wind-induced fluttering motion. While conventional fluttering devices are arranged in parallel with the flow direction, here we explore a dangling cross-flow stalk arrangement. This architecture amplifies the vibration by an order of magnitude, making it appropriate for low-cost organic piezomaterials. We fabricated prototypes using flexible piezoelectric materials as stalks and polymer film as leaves. A series of experiments demonstrated a peak output power of approximately 600 W and maximum power density of approximately 2 mW /cm3 from a single leaf. © 2011 American Institute of Physics. doi:10.1063/1.3525045
منابع مشابه
FLEHAP: A Wind Powered Supply for Autonomous Sensor Nodes
The development of the Internet of Things infrastructure requires the deployment of millions of heterogeneous sensors embedded in the environment. The powering of these sensors cannot be done with wired connections, and the use of batteries is often impracticable. Energy harvesting is the common proposed solution, and many devices have been developed for this purpose, using light, mechanical vi...
متن کاملFlow energy harvesting with piezoelectric flags
In this article, energy harvesting with a fluttering cantilevered plate covered by piezoelectric patches in an axial flow is adressed. A theoretical model is presented which is then discretized and numerically integrated to perform a parametric study of the energy harvesting efficiency of the system. When one, two or three piezoelectric patches cover the plate, the optimal distributions of the ...
متن کاملPortable Wind Energy Harvesters for Low-Power Applications: A Survey
Energy harvesting has become an increasingly important topic thanks to the advantages in renewability and environmental friendliness. In this paper, a comprehensive study on contemporary portable wind energy harvesters has been conducted. The electrical power generation methods of portable wind energy harvesters are surveyed in three major groups, piezoelectric-, electromagnetic-, and electrost...
متن کاملVertical-stalk Flapping-leaf Generator for Wind Energy Harvesting
We study a parallelized flapping piezo-leaf generator for harvesting ambient wind energy and demonstrate an initial design. We fabricated prototypes in various configurations and performed a series of experiments to study performance trends. We propose a novel vertical-stalk L-shape design that exhibits improved output power density over horizontal piezoelectric configurations. While a signific...
متن کاملVibration Energy Harvesting: Machinery Vibration, Human Movement and Flow Induced Vibration
With the development of low power electronics and energy harvesting technology, selfpowered systems have become a research hotspot over the last decade. The main advantage of self-powered systems is that they require minimum maintenance which makes them to be deployed in large scale or previously inaccessible locations. Therefore, the target of energy harvesting is to power autonomous ‘fit and ...
متن کامل