Reading Technique for Use with 2.45-GHz-Band Small RFID Tags
نویسندگان
چکیده
منابع مشابه
Ultra-low-power flash memory in standard 0.35µm CMOS for passive microwave RFID transponders
We present the design of a flash memory for passive RFID transponders, implemented in a standard – single poly 0.35 μm CMOS process. The memory has 128 bits, sufficient for example to contain the EPC code for Class 0 tags, and is able to perform a complete read operation of all 128 bits with an access time of about 10 ms and a power consumption of only 160 nW. In the erase/program mode Fowler-N...
متن کاملTriple-band Printed Dipole Tag Antenna for RFID Application
In this paper, a triple-band printed dipole tag antenna is proposed for RFID application. The tri-band printed dipole antenna is designed at 0.92 GHz, 2.45 GHz and 5.8 GHz using Computer Simulation Technology (CST). In order to achieve triple-band operation, the proposed antenna contains two branch elements, which acts as an additional resonator. The designed antenna was fabricated using Taconi...
متن کاملBluetooth/802.11 Protocol Adaptation for RFID Tags
The 2.4 GHz frequency band is available throughout most parts of the world for low cost short-range wireless communications and has increased in popularity with the proliferation of networking and cordless technologies based on IEEE 802.11 and Bluetooth. A growing number of RFID systems have also been designed for operation within the 2.4 GHz ISM frequency bands. As more wireless technologies s...
متن کاملDual-band dipole antenna for 2.45 GHz and 5.8 GHz RFID tag application
In this paper, a dual-band dipole antenna for passive radio frequency identification (RFID) tag application at 2.45 GHz and 5.8 GHz is designed and optimized using HFSS 13. The proposed antenna is composed of a bent microstrip patch and a coupled rectangular microstrip patch. The optimal results of this antenna are obtained by sweeping antenna parameters. Its return losses reach to −18.7732 dB ...
متن کاملA Multi Band Mini Printed Omni Directional Antenna with V-shaped for Rfid Applica- Tions
This paper presents a mini multi-band printed omnidirectional antenna with v-shaped structure for radio frequency identification (RFID) applications. The proposed multi-band antenna is developed from the initial v-shaped design which is only capable of working as a single-band antenna. By deploying a concept of dipole antenna to an initial design, the proposed antenna is accomplished to operate...
متن کامل