Infrared diffractive filtering for extreme ultraviolet multilayer Bragg reflectors.
نویسندگان
چکیده
We report on the development of a hybrid mirror realized by integrating an EUV-reflecting multilayer coating with a lamellar grating substrate. This hybrid mirror acts as an efficient Bragg reflector for extreme ultraviolet (EUV) radiation at a given wavelength while simultaneously providing spectral-selective suppression of the specular reflectance for unwanted longer-wavelength radiation due to the grating phase-shift resonance. The test structures, designed to suppress infrared (IR) radiation, were fabricated by masked deposition of a Si grating substrate followed by coating of the grating with a Mo/Si multilayer. To give the proof of principle, we developed such a hybrid mirror for the specific case of reflecting 13.5 nm radiation while suppressing 10 μm light, resulting in 61% reflectance at the wavelength of 13.5 nm together with the 70 × suppression rate of the specular reflection at the wavelength of 10 μm, but the considered filtering principle can be used for a variety of applications that are based on utilization of broadband radiation sources.
منابع مشابه
Probing multilayer stack reflectors by low coherence interferometry in extreme ultraviolet.
We use low coherence interferometry to investigate the depth structure of a complex multilayer stack reflector. The probing instrument is an interferometer based on a Fresnel's bi-mirror illuminated by relatively wide-band synchrotron undulator light near 13.5 nm. Simulations clearly confirm that our test object generates two back propagated signals that behave as if reflected on two effective ...
متن کاملAll-nitride AlxGa1−xN:Mn/GaN distributed Bragg reflectors for the near-infrared
Since the technological breakthrough prompted by the inception of light emitting diodes based on III-nitrides, these material systems have emerged as strategic semiconductors not only for the lighting of the future, but also for the new generation of high-power electronic and spintronic devices. While III-nitride optoelectronics in the visible and ultraviolet spectral range is widely establishe...
متن کاملHybrid Dielectric-Metallic Back Reflector for Amorphous Silicon Solar Cells
In this paper, we present the design and fabrication of hybrid dielectric-metallic back surface reflectors, for applications in thin film amorphous silicon solar cells. Standard multilayer distributed Bragg reflectors, require a large number of layers in order to achieve high reflectance characteristics. As it turns out, the addition of a metallic layer, to the base of such a multilayer mirror,...
متن کاملSiO2/TiO2 distributed Bragg reflector near 1.5 μm fabricated by e-beam evaporation
Related Articles Molecular beam epitaxial growth of high-reflectivity and broad-bandwidth ZnTe/GaSb distributed Bragg reflectors J. Vac. Sci. Technol. B 31, 03C109 (2013) Lloyd's mirror interferometer using a single-mode fiber spatial filter J. Vac. Sci. Technol. B 31, 021604 (2013) Development of optical system with rotational misalignment adjustment for multi-optical-probe confocal microscopy...
متن کاملFirst- and Second-Order Bragg Gratings in Single-Mode Planar Waveguides of Chalcogenide Glasses
Firstand second-order Bragg reflectors at telecommunication wavelength (1.5 m) were fabricated in single-mode monolayer (As2S3) and multilayer (As-S-Se/As-S) chalcogenide glass (ChG) planar waveguides with near bandgap illumination using an interferometric technique. Reflectivities as high as 90% near 1555 nm, and index modulations up to 3 10 4 were achieved. The volume photodarkening effect is...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Optics express
دوره 21 14 شماره
صفحات -
تاریخ انتشار 2013