Flower-like Na2O nanotip synthesis via femtosecond laser ablation of glass
نویسندگان
چکیده
The current state-of-the-art in nanotip synthesis relies on techniques that utilize elaborate precursor chemicals, catalysts, or vacuum conditions, and any combination thereof. To realize their ultimate potential, synthesized nanotips require simpler fabrication techniques that allow for control over their final nano-morphology. We present a unique, dry, catalyst-free, and ambient condition method for creating densely clustered, flower-like, sodium oxide (Na2O) nanotips with controllable tip widths. Femtosecond laser ablation of a soda-lime glass substrate at a megahertz repetition rate, with nitrogen flow, was employed to generate nanotips with base and head widths as small as 100 and 20 nm respectively, and lengths as long as 10 μm. Control of the nanotip widths was demonstrated via laser dwell time with longer dwell times producing denser clusters of thinner nanotips. Energy dispersive X-ray analysis reveals that nanotip composition is Na2O. A new formation mechanism is proposed, involving an electrostatic effect between ionized nitrogen and polar Na2O. The synthesized nanotips may potentially be used in antibacterial and hydrogen storage applications.
منابع مشابه
Precise microstructuring of indium-tin oxide thin films on glass by selective femtosecond laser ablation
Transparent conductive oxide (TCO) thin films were removed from glass substrates using femtosecond laser pulses. Irradiating through the glass, the threshold for complete TCO ablation was much lower than for front-side irradiation. Additionally, the former method created almost rectangular crosssectional groove profiles despite the Gaussian laser beam. This indicates a non-thermal ultrafast abl...
متن کاملMorphological and chemical evolution on InP(100) surface irradiated with femtosecond laser
Single crystalline InP was ablated in air with p-polarized Ti:sapphire femtosecond laser at a fixed laser fluence of 82 mJ/cm. Ripples parallel to the laser polarization direction were found by scanning electron microscopy and atomic force microscopy to form for laser pulses ranging from 50 to 1000, whereas flower-like structures appeared for laser pulses of 10 and above. Analysis by X-ray phot...
متن کاملFemtosecond micro- and nano-machining of materials for microfluidic applications
Ultrafast laser micromachining is a promising candidate for microand nano-fabrication technology. Due to the high precision of femtosecond ablation, laser-machined features can be added to devices prototyped by lithography. To accomplish that, parametric studies of laser interrogation of materials of interest are necessary. We present femtosecond laser ablation studies of glass, PDMS, fused sil...
متن کاملFemtosecond laser rapid fabrication of large-area rose-like micropatterns on freestanding flexible graphene films
We developed a simple, scalable and high-throughput method for fabrication of large-area three-dimensional rose-like microflowers with controlled size, shape and density on graphene films by femtosecond laser micromachining. The novel biomimetic microflower that composed of numerous turnup graphene nanoflakes can be fabricated by only a single femtosecond laser pulse, which is efficient enough ...
متن کاملAn investigation on the effect of acetone and DMF as solvent on synthesis of P2O5-CaO-Na2O-TiO2 glass powder by sol-gel method
The sol-gel synthesis method allows greater control over glass morphology at a relatively low processing temperature (200 °C) in comparison with melt-derived glasses. In present study, phosphate-based glasses with the general formula of (P2O5)55-(CaO)25-(Na2O)10-(TiO2)10 was synthesized via a novel and facil...
متن کامل