Sterility maintenance assessment of moist/wet material after steam sterilization and 30-day storage

نویسندگان

  • GADA Moriya
  • KU Graziano
چکیده

Moist/wet materials stored after autoclaving are considered contaminated and not recommended for use. This study evaluates the maintenance of sterility in moist/wet material after being submitted to steam sterilization and stored for a period of 30 days. Aiming to support decision-making in emergency situations, 40 surgical boxes packed in nonwoven cloth covering Spunbound, Metblouwn, Spunbound (SMS): half (the experimental group) were placed in an autoclave but the drying phase was interrupted, yielding moist/wet materials and the other half (the negative control group) underwent the complete cycle. The external parts of each surgical box were deliberately contaminated with Serratia marcescens and subsequently stored for 30 days. After this period, the boxes' contents were submitted to sterility tests and no growth was observed. The presence of moisture inside the surgical boxes did not interfere with maintaining their sterility.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Effects of steam sterilization on thermogelling chitosan-based gels.

A new thermogelling chitosan-glycerophosphate system has been recently proposed for biomedical applications such as drug and cell delivery. The objectives of this work were to characterize the effect of steam sterilization on the in vitro and in vivo end performances of the gel and to develop a filtration-based method to assess its sterility. Autoclaving 2% (w/v) chitosan solutions for as short...

متن کامل

بررسی اثر استریلیزاسیون خشک و مرطوب بر سایش لیگاچرکاترهای ارتودنتیک

Background and Aim: Orthodontic ligature cutting pliers are expensive. Methods of sterilization should be safe considering patients' health as well as lifetime of orthodontic pliers. The purpose of this study was to compare the wear of orthodontic ligature cutting pliers after sterilizing with dry heat or steam autoclave. Materials and Methods: In this experimental study, thirty ligature cuttin...

متن کامل

The influence of environmental temperatures and air humidity in the maintenance of the sterility of materials sterilized in different wraps

Introduction / objectives One of the variables which interfere in the maintenance of sterility in the materials is the storage. There are many official and not-official recommendations for temperature and air humidity control in the storage area, however without any theoretical or experimental basis. Some hospitals do not have a system that makes the control of temperature and humidity possible...

متن کامل

Limitations of thioglycolate broth as a sterility test medium for materials exposed to gaseous ethylene oxide.

Although ethylene oxide is a reliable sterilizer, the process may be limited by diffusion. Thus, situations may exist where microorganisms are protected from the sterilizing gas. It is possible that the exterior of a substance may be sterilized, whereas the interior is not. We investigated three general types of materials in which this limitation of diffusion could occur: the bore of glass and ...

متن کامل

Diethylene Glycol as a Medium for Heat Sterilization of Surgical Instruments *

Since the beginning of aseptic surgery there has been a constant search for a quick and economical means of sterilizing surgical instruments without dulling effect. Heat sterilization in oil, as introduced by Lyman5 in 1917, has proved to be the most satisfactory method thus far, and is widely used in hospitals. There is a definite disadvantage to this procedure, due to the fact that hot oil ac...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره 5  شماره 

صفحات  -

تاریخ انتشار 2010