Film Thickness of Lithium Battery Fast De-Noising Based on Atomic Sequence Template Library
نویسندگان
چکیده
The natural frequency and scanning vibration frequency of C-dynamic scanning system of laser sensors are acquired for film thickness of lithium battery de-noising based on multi-resolution wavelet algorithm. For this reason, fast de-noising based on atomic sequence template library is present. First, under various mode of scanning, best atomic sequence template is built by sparse decomposition. Secondly, at the given mode, film thickness data is match to the best atomic sequence to de-nosing. Experimental results show that template-matching pursuit (MP) algorithm is effective and algorithm speed is higher than MP 57 times.
منابع مشابه
In Situ Deposition and Ultrahigh Vacuum STMÕAFM Study of V2O5 ÕLi3PO4 Interface in a Rechargeable Lithium-Ion Battery
A thin-film solid-state battery was prepared with a vanadium pentoxide cathode and a lithium phosphate electrolyte and studied in situ by ultrahigh vacuum scanning tunneling microscope/atomic force microscopy ~STM/AFM!. Orientation of the ~001! plane of V2O5 parallel to the substrate was detected via observation of the periodicity of 11.7 6 0.5 Å, which is consistent with the unit cell spacing ...
متن کاملElaboration and characterization of a free standing LiSICON membrane for aqueous lithium-air battery
In order to develop a LISICON separator for an aqueous lithium-air battery, a thin membrane was prepared by a tape-casting of a Li1.3Al0.3Ti1.7 (PO4)3−AlPO4 based slip followed by a sintering step. By optimizing the grain sizes, the slip composition and the sintering treatment, the mechanical properties were improved and the membrane was reduced to a thickness of down to 40 μm. As a result, the...
متن کاملFabrication of single-layer MS2 (M=Mo, W) nanosheets using Li battery setup
Lithium intercalation is a convenient method to prepare few-layer and single-layer MS2 (M=Mo, W) nanosheets. This method is, however, very time-consuming (few days) and it is difficult to control the reaction parameters. To overcome these drawbacks, we have proposed a method to use an Li battery set-up to significantly reduce the reaction time (few hours) and electrochemically intercalate lithi...
متن کاملMeasuring thickness changes in thin films due to chemical reaction by monitoring the surface roughness with in situ atomic force microscopy.
Measuring the changing thickness of a thin film, without a reference, using an atomic force microscope (AFM) is problematic. Here, we report a method for measuring film thickness based on in situ monitoring of surface roughness of films as their thickness changes. For example, in situ AFM roughness measurements have been performed on alloy film electrodes on rigid substrates as they react with ...
متن کاملDevelopment of Lifetime Prediction Model of Lithium-Ion Battery Based on Minimizing Prediction Errors of Cycling and Operational Time Degradation Using Genetic Algorithm
Accurate lifetime prediction of lithium-ion batteries is a great challenge for the researchers and engineers involved in battery applications in electric vehicles and satellites. In this study, a semi-empirical model is introduced to predict the capacity loss of lithium-ion batteries as a function of charge and discharge cycles, operational time, and temperature. The model parameters are obtai...
متن کامل