Strain analysis of a disk subjected to diametral compression by means of holographic interferometry.
نویسندگان
چکیده
Two simultaneous holograms and several directions of observation are utilized to determine the components of displacement and strain in the disk. A reference strip is introduced to relate the fringe orders in the two holograms. A very good agreement is obtained between the holographic results and the elasticity theory solution. The obtained displacement field is estimated to be accurate to 8 x 10(-6) cm, which is approximately one-eighth the wavelength of the laser light utilized to obtain the holograms.
منابع مشابه
Exact full-field analysis of strain and displacement for circular disks subjected to partially distributed compressions
The disk in diametral compression has been investigated frequently on developing experimental techniques, such as photoelasticity and Moiré interferometry, for several decades. Theoretically, the compression as a concentrated force is more conducive to analyze but it is impossible to achieve such loading condition experimentally. The distributed compression on a finite area at rim is important ...
متن کاملMeasuring the deposited energy from a non-ionizing laser beam in water by digital holographic interferometry
Digital Holographic interferometry is a powerful and widely used optical technique for accurate measurement of variations in physical quantities such as density, refractive index, and etc. In this study, an experimental digital holographic interferometry setup was designed and used to measure the amount of energy changes induced by absorption of radiation from a non-ionizing infrared laser beam...
متن کاملA novel dentin bond strength measurement technique using a composite disk in diametral compression.
New methods are needed that can predict the clinical failure of dental restorations that primarily rely on dentin bonding. Existing methods have shortcomings, e.g. severe deviation in the actual stress distribution from theory and a large standard deviation in the measured bond strength. We introduce here a novel test specimen by examining an endodontic model for dentin bonding. Specifically, w...
متن کاملStress Analysis of FGM Rotating Disk Subjected to Mechanical and Thermal Loads In Aircraft Gas Turbine Engine
Pursuant to the high usage of rotating the disk in aircraft gas turbine engine, turbo pumps in oil and gas industries, steam and gas turbines in power plants, marine gas turbine and other industrial rotary machines designing and getting under the mechanical and thermal loading casued this design and analysis to be as a special significance. These disks are subjected to mechanical and thermal lo...
متن کاملNumerical Analysis of Severe Plastic Deformation by High Pressure Torsion
High-pressure torsion (HPT) is a metal processing method in which the sample is subjected to a very high plastic shear deformation. This process can produce exceptional levels of grain refinement, and provides a corresponding improvement in mechanical properties. To investigate the stress and strain distribution due to HPT process finite element simulation were conducted to investigate effectiv...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Applied optics
دوره 12 8 شماره
صفحات -
تاریخ انتشار 1973