Analysis and Experimental Demonstration of Conformal Adaptive Phase-locked Fiber Array for Laser Communications and Beam Projection Applications

نویسندگان

  • Ling Liu
  • Mikhail A. Vorontsov
چکیده

Title of Dissertation: ANALYSIS AND EXPERIMENTAL DEMONSTRATION OF CONFORMAL ADAPTIVE PHASE-LOCKED FIBER ARRAY FOR LASER COMMUNICATIONS AND BEAM PROJECTION APPLICATIONS Ling Liu, Doctor of Philosophy, 2008 Dissertation Directed By: Professor Mikhail A. Vorontsov Institute for Systems Research and Department of Electrical and Computer Engineering, University of Maryland at College Park The primary goal of this research is the analysis, development, and experimental demonstration of an adaptive phase-locked fiber array system for free-space optical communications and laser beam projection applications. To our knowledge, the developed adaptive phase-locked system composed of three fiber collimators (subapertures) with tip-tilt wavefront phase control at each subaperture represents the first reported fiber array system that implements both phase-locking control and adaptive wavefront tip-tilt control capabilities. This research has also resulted in the following innovations: (a) The first experimental demonstration of a phase-locked fiber array with tip-tilt wavefront aberration compensation at each fiber collimator; (b) Development and demonstration of the fastest currently reported stochastic parallel gradient descent (SPGD) system capable of operation at 180,000 iterations per second; (c) The first experimental demonstration of a laser communication link based on a phaselocked fiber array; (d) The first successful experimental demonstration of turbulence and jitter-induced phase distortion compensation in a phase-locked fiber array optical system; (e) The first demonstration of laser beam projection onto an extended target with a randomly rough surface using a conformal adaptive fiber array system. Fiber array optical systems, the subject of this study, can overcome some of the drawbacks of conventional monolithic large-aperture transmitter/receiver optical systems that are usually heavy, bulky, and expensive. The primary experimental challenges in the development of the adaptive phased-locked fiber-array included precise (<5 microrad) alignment of the fiber collimators and development of fast (100kHz-class) phase-locking and wavefront tip-tilt control systems. The precise alignment of the fiber collimator array is achieved through a specially developed initial coarse alignment tool based on high precision piezoelectric picomotors and a dynamic fine alignment mechanism implemented with specially designed and manufactured piezoelectric fiber positioners. Phase-locking of the fiber collimators is performed by controlling the phases of the output beams (beamlets) using integrated polarization-maintaining (PM) fiber-coupled 3 LiNbO phase shifters. The developed phase-locking controllers are based on either the SPGD algorithm or the multi-dithering technique. Subaperture wavefront phase tip-tilt control is realized using piezoelectric fiber positioners that are controlled using a computer-based SPGD controller. Both coherent (phase-locked) and incoherent beam combining in the fiber array system are analyzed theoretically and experimentally. Two special fiber-based beam-combining testbeds have been built to demonstrate the technical feasibility of phase-locking compensation prior to free-space operation. In addition, the reciprocity of counterpropagating beams in a phase-locked fiber array system has been investigated. Coherent beam combining in a phase-locking system with wavefront phase tip-tilt compensation at each subaperture is successfully demonstrated when laboratory-simulated turbulence and wavefront jitters are present in the propagation path of the beamlets. In addition, coherent beam combining with a non-cooperative extended target in the control loop is successfully demonstrated. ANALYSIS AND EXPERIMENTAL DEMONSTRATION OF CONFORMAL ADAPTIVE PHASE-LOCKED FIBER ARRAY FOR LASER COMMUNICATIONS AND BEAM PROJECTION APPLICATIONS

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

ABCD matrix for reflection and refraction of laser beam at tilted concave and convex elliptic paraboloid interfaces and studying laser beam reflection from a tilted concave parabola of revolution

Studying Gaussian beam is a method to investigate laser beam propagation and ABCD matrix is a fast and simple method to simulate Gaussian beam propagation in different mediums. Of the ABCD matrices studied so far, reflection and refraction matrices at various surfaces have attracted a lot of researches. However in previous work the incident beam and the principle axis of surface are in parallel...

متن کامل

Using of Broadened Asymmetric Waveguide Structure for 980nm Diode Laser

Laser diode beam divergence is the main parameter for beam shaping and fiber optic coupling. Increasing the waveguide layer thickness is the conventional method to decrease the beam divergence. In this paper, the broadened asymmetric waveguide is introduced to decrease the divergence without increasing the optical power. The asymmetric waveguide was used to shift the vertical optical field to n...

متن کامل

Design and Simulation of Fully Printable Conformal Antennas with BST/Polymer Composite Based Phase Shifters

A fully printable and conformal antenna array on a flexible substrate with a new LeftHanded Transmission Line (LHTL) phase shifter based on a tunable Barium Strontium Titanate (BST)/polymer composite is proposed and computationally studied for radiation pattern correction and beam steering applications. First, the subject 1× 4 rectangular patch antenna array is configured as a curved conformal ...

متن کامل

−70 dB optical carrier suppression by two-beam coupling in photorefractive media

Suppression of an optical carrier from an RF modulated laser beam of wavelength 532 nm is performed using two-beam coupling in photorefractive barium titanate. A theoretical analysis reveals that perfect suppression can be achieved at a specific modulation strength, which depends on the gain and intensity ratio between the two beams. The experiments achieve a maximum of −72.9±2.4 dB carrier sup...

متن کامل

Design and Simulation of a Highly Discriminant Laser Array Waveguide

The laser array waveguide designed and simulated in this thesis is highly mode discriminant and able to take advantage of spatially dispersive high-power pumping sources, such as, semiconductor laser diode arrays. The waveguide measures 5cm x 0.5cm and consists of an array of five 4Am x 4Am single mode Nd +3 doped glass lasers embedded in double cladding to improve total pumping efficiency. The...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2008