Robotic Simulation of the Docking and Path Following of an Autonomous Small Grain Harvesting System
نویسندگان
چکیده
Abstract. Researchers around the world have focused on autonomous agriculture, with systems encompassing greenhouse, orchard, field and other applications. Research has shown the potential and ability of the technology to allow a vehicle or selection of vehicles to follow a specified task. In this study, one aspect of the problem, that of operating a tractor-cart combination in conjunction with a small-grain combine harvester, was investigated. The tractor-cart combination and combine harvester application was selected because of the high fatigue and long duration aspects of the problem. The system was simulated using two iRobot Magellan Pro robots in an indoor environment. The differential drive robots were software constrained to match the dynamics of typical agricultural vehicles. Position feedback was supplied by odometry. A small towed trailer was added to one robot to simulate a typical grain cart.
منابع مشابه
Differential Flatness−based Formation following of a Simulated Autonomous Small Grain Harvesting System
Researchers around the world have focused on autonomous agriculture with systems encompassing greenhouse, orchard, field, and other applications. Research has shown the potential and ability of the technology to allow a vehicle or selection of vehicles to follow a specified task. In this study, one aspect of the problem, that of operating a tractor−cart combination in conjunction with a small−g...
متن کاملSimulation of economic damage at mechanized wheat harvesting in Khuzestan province of Iran
Abstract The aim of this research is to present a simulation model for reducing economic damages of mechanized wheat harvesting in the weather conditions of Khuzestan province and similar areas. The simulated model is composed of three sub-models, for determining of the appropriate working hours, grain losses, and economic sub-model. In order to determine the appropriate working hours, a mathem...
متن کاملDesign of an Intelligent Controller for Station Keeping, Attitude Control, and Path Tracking of a Quadrotor Using Recursive Neural Networks
During recent years there has been growing interest in unmanned aerial vehicles (UAVs). Moreover, the necessity to control and navigate these vehicles has attracted much attention from researchers in this field. This is mostly due to the fact that the interactions between turbulent airflows apply complex aerodynamic forces to the system. Since the dynamics of a quadrotor are non-linear and the ...
متن کاملPath Planning and Control of an Industrial Robot Used for Opening Tap Hole of an Electric Arc Furnace
The electric arc furnace (EAF) is one of the popular methods of steel production from steel scraps. The plasma arc is used in EAF to generate heat for melting scarp or direct reduced iron (DRI). The liquid metal is drained from the EAF through the tap hole. Nowadays, it is critical to use Automated/robotic tools for opening the tap hole with oxygen lancing. Because many workers have been blinde...
متن کاملDesign of Robust Finite-Time Nonlinear Controllers for a 6-DOF Autonomous Underwater Vehicle for Path Tracking Objective
In this paper, kinematic and dynamic equations of a 6-DOF (Degrees Of Freedom) autonomous underwater vehicle (6-DOF AUV) are introduced and described completely. By developing the nonsingular terminal sliding mode control method, three separate groups of control inputs are proposed for the autonomous underwater vehicle subjected to uncertainties including parametric uncertainties, unmodeled dyn...
متن کامل