Fault severity diagnosis of rolling element bearings based on kurtogram and envelope analysis

نویسندگان

  • Fengshou Gu
  • Xiange Tian
  • Zhi Chen
  • Tie Wang
  • Andrew Ball
چکیده

Faults in rolling element bearing are among the main causes of breakdown in rotating machines. Vibration is an effective technique for machine condition monitoring. Vibration signals from a defective bearing with a localized fault contain a series of impulsive responses, which result from the impacts of the defective part(s) with other elements. Most researches carried out have focused on fault location identification. However, limited work has been reported for fault severity estimation, which is critical to make decision for maintenance actions. To improve current diagnostic capability, this paper pays more attention to bearing fault severity diagnosis. It models the vibration sources from bearing defects as an impact process with constant size but three different lengths corresponding to outer race fault, inner race fault and roller fault, respectively. Then an experimental study was followed to evaluate this model. Moreover, the conventional envelope analysis of the measured vibration signals from the tested faulty bearings is optimized by spectral kurtosis (SK) for automatic and reliable fault detection and fault category diagnosis. In the meantime, the diagnostic parameters for fault severity estimation: root mean squared (RMS) values and kurtosis amplitude are developed based on the model results and subsequently evaluated to be agreed vigorously with tested fault cases. Keywords—kurtogram, envelope analysis, bearing fault diagnosis, elastic deformation, geometry deformation

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

A Novel Intelligent Fault Diagnosis Approach for Critical Rotating Machinery in the Time-frequency Domain

The rotating machinery is a common class of machinery in the industry. The root cause of faults in the rotating machinery is often faulty rolling element bearings. This paper presents a novel technique using artificial neural network learning for automated diagnosis of localized faults in rolling element bearings. The inputs of this technique are a number of features (harmmean and median), whic...

متن کامل

Bearing Fault Detection Based on Maximum Likelihood Estimation and Optimized ANN Using the Bees Algorithm

Rotating machinery is the most common machinery in industry. The root of the faults in rotating machinery is often faulty rolling element bearings. This paper presents a technique using optimized artificial neural network by the Bees Algorithm for automated diagnosis of localized faults in rolling element bearings. The inputs of this technique are a number of features (maximum likelihood estima...

متن کامل

Fault Diagnosis Method Based on Kurtosis Wave and Information Divergence for Rolling Element Bearings

Fault diagnosis depends largely on feature analysis of vibration signals. However, feature extraction for fault diagnosis is difficult because the vibration signals often contain a strong noise component. Noises stronger than the actual fault signal may interfere with diagnosis and ultimately cause misdiagnosis. In order to extract the feature from a fault signal highly contaminated by the nois...

متن کامل

Localized fault detection and diagnosis in

This paper puts together a collection of a number of previously proposed signal processing techniques to detect and diagnose faults in rolling element bearings. The collection of previously proposed signal processing algorithms contains two main phases. Phase one includes a surveillance and diagnosis stage using time, frequency and an envelope analysis over the full frequency bandwidth. The sec...

متن کامل

A DWT and SVM based method for rolling element bearing fault diagnosis and its comparison with Artificial Neural Networks

A classification technique using Support Vector Machine (SVM) classifier for detection of rolling element bearing fault is presented here.  The SVM was fed from features that were extracted from of vibration signals obtained from experimental setup consisting of rotating driveline that was mounted on rolling element bearings which were run in normal and with artificially faults induced conditio...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2013