Cavity Resonator Measurements at 90 Ghz

نویسنده

  • W. R. Fowkes
چکیده

A small 4-cavity assembly designed to operate at W-band was built using OFE copper parts machined by wire and plunge EDM proocesses. The machined pieces were then diffusion bonded together. A cutaway section of one the cavity modules is shown in figure 1. Each of the four cavities approximates a one-half guided wavelength at 90 Ghz of reduced height WR 10 waveguide coupled to full height WR10 waveguide through a rectangular iris. Among the purposes of this experiment are the following:

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Micromachined Cavity Resonator Sensors for on Chip Material Characterisation in the 220–330 GHz band

A silicon micromachined waveguide on-chip sensor for J-band (220-325 GHz) is presented. The sensor is based on a micromachined cavity resonator provided with an aperture in the top side of a hollow waveguide for sensing purposes. The waveguide is realized by microfabrication in a silicon wafer, gold metallized and assembled by thermocompression bonding. The sensor is used for measuring the comp...

متن کامل

Q-switched Operation of a Coupled-Resonator

We report Q-switched operation from an electrically-injected monolithic coupledresonator structure which consists of an active cavity with InGaAs quantum wells optically coupled to a passive cavity. The passive cavity contains a bulk GaAs region which is reversebiased to provide variable absorption at the lasing wavelength of 990 nm. Cavity coupling is utilized to effect large changes in output...

متن کامل

Design of Dual-Mode Substrate Integrated Waveguide Band-Pass Filters

Three dual-mode band-pass filters are presented in the present paper. The first filter is realized by dual-mode substrate integrated waveguide (SIW) cavity; the second is based on the integration of SIW cavity with electromagnetic band gap (EBG); and the third is based on the integration of SIW cavity with complementary split ring resonator (CSRR). The dual-mode SIW cavity is designed to have a...

متن کامل

Electron Spin Echoes with a Loop-Gap Resonator*

We report our preliminary findings on the use of a split-ring (I) or loop-gap resonator in electron spin echo (ESE) spectroscopy at 9 GHz. The loop-gap (LG) resonator of Froncisz and Hyde (2) was reported to have several features which could make it more advantageous than the overcoupled (3) TEro2 microwave cavity traditionally used in ESE experiments (4). Among these are the large uniform micr...

متن کامل

High-Q Tunable Microwave Cavity Resonators and Filters using SOI-based RF MEMS Tuners

This paper presents the modeling, design, fabrication and measurement of MEMS-enabled continuously tunable evanescent-mode electromagnetic cavity resonators and filters with very high unloaded quality factors (Qu). Integrated electrostatically-actuated thin diaphragms are used for the first time for tuning the frequency of the resonators/filters. An example tunable resonator with 2.6:1 (5.0 − 1...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 1998