Morphing Wing Real Time Optimization in Wind Tunnel Tests
نویسندگان
چکیده
In this paper, wind tunnel results of a real time optimization of a morphing wing in wind tunnel for delaying the transition towards the trailing edge are presented. A morphing rectangular finite aspect ratio wing, having a wind tunnel experimental airfoil reference cross-section, was considered with its upper surface made of a flexible composite material and instrumented with Kulite pressure sensors, and two smart memory alloys actuators. Several wind tunnel tests runs for various Mach numbers, angles of attack and Reynolds numbers were performed in the 6’×9’ wind tunnel at the Institute for Aerospace Research at the National Research Council Canada. Unsteady pressure signals were recorded and used as feed back in real time control while the morphing wing was requested to reproduce various optimized airfoils by changing automatically the two actuators strokes. The paper shows the optimization method implemented into the control software code that allows the morphing wing to adjust its shape to an optimum configuration under the wind tunnel airflow conditions.
منابع مشابه
Wind Tunnel Investigation of Pressure Distribution and Transition Position of a Swept 3D Wing
Extensive wind tunnel tests are conducted to evaluate surface pressure distribution of a semi span swept wing. The wing section has a laminar flow airfoil similar to NACA 6-series airfoils. The investigations are conducted at various speeds and angles of attack. Surface pressure distribution over the wing upper surface is measured for both chordwise and spanwise sections. Statistical analyses a...
متن کاملDesign, Control, and Experimental Modeling of a Morphing Aircraft Configuration
This work describes the design and construction of a fully adaptive aircraft configuration used as an experimental testbed for aerodynamic modeling and flight control. The adaptive model is designed to achieve large scale shape changes in order to investigate morphing for multi-mission UAVs. There are five independent planform changes along with independent twist control for each wing. Wind tun...
متن کاملPareto Optimization of Two-element Wing Models with Morphing Flap Using Computational Fluid Dynamics, Grouped Method of Data handling Artificial Neural Networks and Genetic Algorithms
A multi-objective optimization (MOO) of two-element wing models with morphing flap by using computational fluid dynamics (CFD) techniques, artificial neural networks (ANN), and non-dominated sorting genetic algorithms (NSGA II), is performed in this paper. At first, the domain is solved numerically in various two-element wing models with morphing flap using CFD techniques and lift (L) and drag ...
متن کاملEffect of Wing Sweep Angle on the Vortex Interaction of a Tail-Wing Configuration
The goal of this investigation is to study the effect of wing sweep angle on the horizontal wing-body- tail configurations in subsonic flow. For this purpose, a series of wind tunnel tests were conducted on a model having a moveable horizontal tail and a wing planform with different sweep angles. Tests were performed at different tail deflection angles. Static surface pressure distribution over...
متن کاملAircraft Control via Variable Cant-Angle Winglets
This paper investigates a novel method for the control of “morphing” aircraft. The concept consists of a pair of winglets with adjustable cant angle, independently actuated and mounted at the tips of a baseline flying wing. The general philosophybehind the conceptwas that for specificflight conditions such as a coordinated turn, the use of two control devices would be sufficient for adequate co...
متن کامل