Photonic Crystal Waveguide 1x3 Flexible Power Splitter for Optical Network
نویسندگان
چکیده
A compact 1x3 power splitter based on Photonic Crystal Waveguides (PCW) with flexible power splitting ratio is presented in this paper. Multimode interference coupler (MMI) is integrated with PCW. The device size reduction compared with the conventional MMI power splitter is attributed to the large dispersion of the PCW. Band Solve tool is used to calculate the band structure of PCW. Finite Difference Time Domain (FDTD) method is adopted to simulate the relevant structure at 1550nm wavelength. The device is polarization insensitive and allows the control of output (o/p) powers within certain percentage points for both polarizations. Keywords—Dispersion, MMI Coupler, Photonic Bandgap, Power Splitter.
منابع مشابه
A New Design of Photonic Crystal Filter and Power Splitter Based on Ring Resonators
Here, we propose an optical filter and an optical power splitter based on two-dimensionalphotonic crystal all circular ring resonators. These structures are made of a square lattice ofsilicon rods with the refractive index n1=3.464 surrounded by air (with refractive indexn2=1). First, we have designed the filter and by using that, we designed a power splitter. Thetransmission efficiency and Qua...
متن کامل1x3 Beam Splitter Based on Self-Imaging Phenomena in Air-Slab Photonic Crystal Waveguides
A 1x3 beam splitter using multi-mode interference based on self-imaging is demonstrated theoretically and experimentally in PhCWs. The total transmission of the 1x3 splitter is almost equal to the corresponding length of W1 PhCW. The input power is distributed equally between the output ports within 1dB from 1541nm to 1552nm. KeywordsSplitter; Self-imaging; multi-mode interference; Photonic Cry...
متن کاملDesign of a High-Bandwidth Y-Shaped Photonic Crystal Power Splitter for TE Modes
In this paper, a Y-shaped power splitter based on a two dimensional photonic crystal (PhC) for TE modes is designed and optimized. A triangular lattice of air holes is used for Y-shaped power divider. For analyzing these structures, plane wave expansion (PWE) and finite difference time domain (FDTD) methods are used. The simulation results show that more than 98% of the input power is transmitt...
متن کاملDesign of Photonic Crystal Polarization Splitter on InP Substrate
In this article, we suggested a novel design of polarization splitter based on coupler waveguide on InP substrate at 1.55mm wavelength. Photonic crystal structure is consisted of two dimensional (2D) air holes embedded in InP/InGaAsP material with an effective refractive index of 3.2634 which is arranged in a hexagonal lattice. The photonic band gap (PBG) of this structure is determined using t...
متن کاملUltra-Fast All-Optical Half Subtractor Based on Photonic Crystal Ring Resonators
Abstract: In this paper, we aim to design and propose a novel structure for all-opticalhalf subtractor based on the photonic crystal. The structure includes two optical switches,one power splitter, and one power combiner. The optical switches are made of theresonant rings which use the nonlinear rods for dropping operation. The footprint of thedesigned structure is about...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2013