Machine Theory Dynamic tooth loads of planetary gear sets having tooth profile wear
نویسندگان
چکیده
A computational model of a planetary gear set is employed to study the influence of surface wear on the dynamic behavior of a typical planetary gear set. The overall computational scheme combines a wear model that defines geometric description of contacting gear tooth surfaces having wear and a deformable-body dynamic model of a planetary gear set. The wear model employs a quasi-static gear contact model to compute contact pressures and Archard’s wear model to determine the wear depth distributions. The worn surfaces are input into the dynamic model to quantify the impact of wear on gear tooth and mesh dynamic forces. The results on a planetary gear set having a fixed planet carrier indicates that the dynamic behavior is nonlinear due to tooth separations in its resonance regions. The results for worn gear surfaces indicate that surface wear has a significant influence in off-resonance speed ranges while its influence diminishes near resonance peaks primarily due to tooth separations. 2004 Elsevier Ltd. All rights reserved.
منابع مشابه
Dynamic Meshing Characteristics of Elliptic Cylinder Gear Based on Tooth Contact Analysis
As the most important working area of gear, teeth play the role of transmitting load and power. Tooth line and tooth profile are the two main characteristics of the tooth surface, which affect the shape of the tooth surface, tooth meshing characteristics and contact characteristics. Taking the elliptical cylinder gear pair in the reversing device of a new type of drum pumping unit as the resear...
متن کاملA Comparative Study of Tooth Wear, Mechanical Power Losses and Efficiency in Normal and High Contact Ratio Asymmetric Spur Gears
The surface tooth wear which occurs at the gear contact region due to inadequate contact strength of the tooth is one of the predominant modes of gear failures. Currently, higher contact ratio spur gears are increasingly used in power transmission applications such as aircraft, wind turbine, automobiles and compact tracked vehicles due to their high load carrying capacity. In this work, the di...
متن کاملMeshing Error of elliptic cylinder gear based on tooth contact analysis
In order to study the dynamic meshing characteristics of the elliptic cylinder gear and obtain the meshing error of the gear transmission system, the two-dimensional static contact analysis of the gear tooth surface is carried out by using ANSYS software, and the key parts of the contact area of the tooth surface are determined. Then, the dynamic meshing model of the elliptic cylinder gear is e...
متن کاملInfluence of dynamic behaviour on elastohydrodynamic lubrication of spur gears
In this study, the elastohydrodynamic lubrication (EHL) behaviour of high-speed spur gear contacts is investigated under dynamic conditions. A non-linear time-varying vibratory model of spur gear pairs is introduced to predict the instantaneous tooth forces under dynamic conditions within both the linear and non-linear operating regimes. In this model, the periodically time-varying gear mesh st...
متن کاملNonlinear Dynamics Analysis of a Gear-Shaft-Bearing System with Breathing Crack and Tooth Wear Faults
Considering backlash, time-varying mesh stiffness and radial clearance of bearing, nonlinear dynamic model of gear bearing flexible shaft system is established taking into account breathing crack in shaft and tooth wear. Nonlinear dynamic equations are solved by Runge-Kutta method. Effect of backlash, crack in shaft and tooth wear faults on the nonlinear dynamic behavior of gear-shaft-bearing s...
متن کامل