Microstructural Analysis and Rheological Modeling of Asphalt Mixtures Containing Recycled Asphalt Materials

نویسندگان

  • Augusto Cannone Falchetto
  • Ki Hoon Moon
  • Michael P. Wistuba
چکیده

The use of recycled materials in pavement construction has seen, over the years, a significant increase closely associated with substantial economic and environmental benefits. During the past decades, many transportation agencies have evaluated the effect of adding Reclaimed Asphalt Pavement (RAP), and, more recently, Recycled Asphalt Shingles (RAS) on the performance of asphalt pavement, while limits were proposed on the amount of recycled materials which can be used. In this paper, the effect of adding RAP and RAS on the microstructural and low temperature properties of asphalt mixtures is investigated using digital image processing (DIP) and modeling of rheological data obtained with the Bending Beam Rheometer (BBR). Detailed information on the internal microstructure of asphalt mixtures is acquired based on digital images of small beam specimens and numerical estimations of spatial correlation functions. It is found that RAP increases the autocorrelation length (ACL) of the spatial distribution of aggregates, asphalt mastic and air voids phases, while an opposite trend is observed when RAS is included. Analogical and semi empirical models are used to back-calculate binder creep stiffness from mixture experimental data. Differences between back-calculated results and experimental data suggest limited or partial blending between new and aged binder.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Identification Effect of Nanoclay on Engineering Properties of Asphalt Mixtures

Nanoclays are new generation of processed clays of interest in a wide range of high performance composites. In other words, nanoclay is defined as a clay that can be modified to make the clay complexes compatible with organic monomers and polymers. Here, it can be said that the polymeric nanocomposites are among the most exciting and promising classes of materials discovered recently. A number ...

متن کامل

Environmental Impacts of Producing Asphalt Mixtures with Varying Degrees of Recycled Asphalt Materials

The environmental impacts of producing asphalt mixtures with different percentages of asphalt binder replacement (ABR) are assessed using the technique of life cycle assessment (LCA). In this paper, only the material production phase of the pavement life cycle is considered. To improve the quality of the LCA, a regionalized life cycle inventory (LCI) database for the Northern Illinois region is...

متن کامل

Laboratory Studies of the Effect of Recycled Glass Powder Additive on the Properties of Polymer Modified Asphalt Binders

In this paper, the effect of adding recycled glass powder (RGP) as a third component in polymer modified bitumen is studied. RGP and styrene butadiene rubber (SBR) is added to the base bitumen in order to prepare modified binders and mixtures. The initial study is performed to determine physical properties of unmodified, SBR modified and RGP-SBR modified asphalt binders which prove RGP's compat...

متن کامل

Evaluation of the Mechanical Properties of the cement treated Cold-in-Place Recycled Asphalt Mixtures

Cold-in-place recycling (CIR) is an environmentally sustainable alternative for preservation of asphalt pavements. A major disadvantage of this practice is the lower strength of the cold-in-place mixtures. Addition of cement into this type of mixture is a method for increasing its bearing capacity. The effect of cement content on the mechanical properties of the cold-in-place recycled asphalt m...

متن کامل

Engineering Properties of SMA Mixtures/Polymer/RGP Blends

In this research, the efficiency of Recycled Glass Powder (RGP) is evaluated for improvement of polymer-modified bitumen and asphalt mixture performance. An extensive laboratory programm was undertaken for polymer-modified bitumen including Crumb Rubber (CR), Styrene Butadiene Styrene (SBS) and Styrene Butadiene Rubber (SBR). Rheological and mechanical proper...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره 7  شماره 

صفحات  -

تاریخ انتشار 2014