Measurement of hydrogen absorption in flowing liquid lithium in the flowing lithium retention experiment (FLIRE)

نویسندگان

  • R. Stubbers
  • W. Olczak
  • M. Nieto
  • D. N. Ruzic
چکیده

Flowing metal plasma facing components (PFCs) have the ability to withstand the extreme conditions of future tokamaks. The FLIRE facility at the University of Illinois measures the retention properties, both for helium (ash pumping) and hydrogen (recycling regime, tritium inventory), of candidate liquid PFCs, such as lithium. Results of hydrogen absorption measurements in flowing liquid lithium are presented. Absorption experiments with a flowing lithium stream passing through a low-pressure neutral deuterium gas show 0.1–0.2% D concentration retained long-term in the sample. A similar experiment with a high deuterium pressure of approximately 1 Torr shows the same long-term deuterium retention. These values indicate that the deuterium absorption rate is limited by the dissociation rate of the molecular deuterium gas on the Li surface. 2004 Published by Elsevier B.V. PACS: 52.40.Hf; 82.30.Lp; 82.65.My; 82.65.Pa

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

FLIRE*/flowing liquid surface retention experiment, design and testing

The flowing liquid surface retention experiment (FLIRE) has been designed to provide fundamental data on the retention and pumping of He, H and other species in flowing liquid surfaces. The FLIRE concept uses an ion source with current densities near 0.5 mA/cm and a working distance of 30 /40 mm. The ion source injects 300 /5000 eV ions into a flowing stream of liquid lithium at nearly normal i...

متن کامل

Helium retention and diffusivity in flowing liquid lithium

The flowing liquid surface retention experiment (FLIRE) has been designed to provide fundamental data on the retention and pumping of He, H and other species in flowing liquid surfaces. The FLIRE facility currently uses an ion beam source, which injects ions into a flowing stream of liquid lithium. Its design allows the liquid lithium to flow between two vacuum chambers that become isolated fro...

متن کامل

Measurement of implanted helium particle transport by a flowing liquid lithium film

Due to its low atomic number, low sputtering yield, high sputtered ion fraction and excellent thermal properties, liquid lithium has been proposed as a potential candidate for advanced plasma-facing components (PFC). Using a liquid material opens the possibility of a continuously flowing, self-regenerating plasma-facing surface with a small residence time. This would allow such component to han...

متن کامل

Hydrogen and helium entrapment in flowing liquid metal plasma-facing surfaces

The ability to use liquids as plasma-facing component (PFCs) depends on their interaction with the plasma and the magnetic field. One important issue for the moving liquid is the ability to entrain particles that strike the PFC surface (helium and hydrogen isotopes) while accommodating high heat loads. To study this problem, a numerical model has been developed using the HEIGHTS computer simula...

متن کامل

Liquid Lithium Wall Experiments in CDX-U

The concept of a flowing lithium first wall for a fusion reactor may lead to a significant advance in reactor design, since it could virtually eliminate the concerns with power density and erosion, tritium retention, and cooling associated with solid walls. Sputtering and erosion tests are currently underway in the PISCES device at the University of California at San Diego (UCSD). To complement...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2005