A Hierarchical Multi-Temporal InSAR Method for Increasing the Spatial Density of Deformation Measurements

Point-like targets are useful in providing surface deformation with the time series of synthetic aperture radar (SAR) images using the multi-temporal interferometric synthetic aperture radar (MTInSAR) methodology. However, the spatial density of point-like targets is low, especially in non-urban areas. In this paper, a hierarchical MTInSAR method is proposed to increase the spatial density of deformation measurements by tracking both the point-like targets and the distributed targets with the temporal steadiness of radar backscattering. To efficiently reduce error propagation, the deformation rates on point-like targets with lower amplitude dispersion index values are first estimated using a least squared estimator and a region growing method. Afterwards, the distributed targets are identified using the amplitude dispersion index and a Pearson correlation coefficient through a multi-level processing strategy. Meanwhile, the deformation rates on distributed targets are estimated during the multi-level processing. The proposed MTInSAR method has been tested for subsidence detection over a suburban area located in Tianjin, China using 40 high-resolution TerraSAR-X images acquired between 2009 and 2010, and validated using the ground-based leveling measurements. The experiment results indicate that the spatial density of deformation measurements can be increased by about 250% and OPEN ACCESS Remote Sens. 2014, 6 3350 that subsidence accuracy can reach to the millimeter level by using the hierarchical MTInSAR method.