Spectral Ratios for Crack Detection Using P and Rayleigh Waves
نویسندگان
چکیده
1 Instituto Mexicano del Petróleo, Eje Central Lázaro Cárdenas 152, Gustavo A. Madero, 07730 México, DF, Mexico 2 Centro de Investigación en Matemáticas, Jalisco s/n, Mineral de Valenciana, 36240 Guanajuato, GTO, Mexico 3 Instituto Politécnico Nacional, Escuela Superior de Ingenierı́a y Arquitectura, UP Zacatenco, 07738 México, DF, Mexico 4 Instituto Politécnico Nacional, Escuela Superior de Ingenierı́a Mecánica y Eléctrica, UP Azcapotzalco, 02250 México, DF, Mexico
منابع مشابه
Fatigue Crack Detection in Metallic Members Using Spectral Anal Ysis of Ul Trasonic Rayleigh Waves
Ultrasonic testing for fatigue crack detection in metallic members are commonly performed using time domain analysis of Rayleigh waves. This approach will be successful only if the fatigue cracks produce strong interaction with the Rayleigh waves. The optimum frequency range of ultrasonic Rayleigh waves for scanning long structural members in the field is from 0.5 to 2.25 MHz because higher fre...
متن کاملDetection of Small Horizontal Defects in Thin Isotropic Plates Using Ultrasonic Rayleigh-Lamb Waves
This paper considers the detection of symmetric crack-like defects in thin metallic plates using longitudinal ultrasonic waves. Only physically small defect sizes are considered in order that the initial stages of crack growth, for example during fatigue, can be detected. This method has the potential to be significantly faster for non-destructively detecting defects than conventional ultrasoni...
متن کاملDeconvolution Procedure for Crack Depth Determination Using Rayleigh Waves
This paper describes a method for determining the depth of machined slots simulating cracks by the use of Rayleigh waves. Six slots varying in depth from 0.5 mm to 3.0 mm fabricated in medium carbon steel have been sized using a commercially available 1.5 MHz Rayleigh wave transducer. One measurement using the pulse-echo method is made for determining the depth of the crack. Minima in the decon...
متن کاملApplication of Wavelet Transform as a Signal Processing Method for Defect Detection using Lamb Waves: Experimental Verification
A Lamb wave-based crack detection method for aluminum plates health monitoring is developed in this paper. Piezoelectric disks are employed to actuate and capture the Lamb wave signals. The position of crack is assumed to be aligned with the sensor and actuator. Extraction of high quality experimental results of lamb wave propagation in a plate-like structure is considerably complicated due to...
متن کاملDesign and fabrication of a high-Q near-field probe for subsurface crack detection
Non-destructive detection and evaluation of invisible cracks in metal structures is an important matter in several critical environments including ground transportation, air transportation and power plants. In this paper, a high-Q near-field Microwave probe is designed and fabricated using defected ground structures for surface and subsurface crack detection in metal structures. For this purpos...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- J. Applied Mathematics
دوره 2012 شماره
صفحات -
تاریخ انتشار 2012