Capacitive Model and S-Parameters of Double-Pole Four-Throw Double-Gate RF CMOS Switch

نویسندگان

  • Viranjay M. Srivastava
  • Kalyan S. Yadav
  • Ghanshyam Singh
چکیده

In this paper, we have analyzed the Double-Pole Four-Throw Double-Gate Radio-Frequency Complementary Metal-Oxide-Semiconductor (DP4T DG RF CMOS) switch using S-parameters for 1 GHz to 60 GHz of frequency range. DP4T DG RF CMOS switch for operation at high frequency is also analyzed with its capacitive model. The results for the development of this proposed switch include the basics of the circuit elements in terms of capacitance, resistance, impedance, admittance, series equivalent and parallel equivalent of this network at different frequencies which are present in this switch whatever they are ON or OFF.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Performance of Double-Pole Four-Throw Double-Gate RF CMOS Switch in 45-nm Technology

In this paper, we have investigated the design parameters of RF CMOS switch, which will be used for the wireless telecommunication systems. A double-pole four-throw double-gate radio-frequency complementary-metal-oxide-semiconductor (DP4T DG RF CMOS) switch for operating at the 1 GHz is implemented with 45-nm CMOS process technology. This proposed RF switch is capable to select the data streams...

متن کامل

Analysis of drain Current and Switching Speed for SPDT Switch and Dpdt Switch with the Proposed DP4T RF CMOS Switch

Conventional CMOS switch uses NMOS as transistors in its main architecture requiring a control voltage of 5.0V and a large resistance at the receivers and antennas (ANTs) to detect the signal. A CMOS integrated circuit switch uses FET transistors to achieve switching between multiple paths, because of its high value of control voltage. Hence it is not suitable for modern portable devices which ...

متن کامل

Characterization Process of MOSFET with Virtual Instrumentation for DP4T RF Switch - A Review

With the increasing interest in radio frequency switch by using the CMOS circuit technology for the wireless communication systems is in demand. A traditional n-MOS Single-Pole Double-Throw (SPDT) switch has good performances but only for a single operating frequency. For multiple operating frequencies, to transmitting or receiving information through the multiple antennas systems, known as MIM...

متن کامل

Measurement Process of MOSFET Device Parameters with VEE Pro Software for DP4T RF Switch

To design a Double-Pole Four-Throw (DP4T) RF switch, measurement of device parameters is required. In this DP4T RF switch CMOS is a unit cell, so with a thin oxide layer of thickness 628 Å which is measured optically. Some of the material parameters were found by the curve drawn between Capacitance versus Voltage (C-V) and Capacitance versus Frequency (C-F) with the application of Visual Engine...

متن کامل

Highly integrated CMOS RF SPDT switch with ESD and unit cell optimisation in MCM

Presented is the performance of a highly integrated RF single-pole double-throw (SPDT) switch fabricated in a 0.18 μm bulk CMOS process and housed in a low-cost laminated multi-chip module (MCML) package. A switch controller is also implemented and consumes ∼40 μA from a 3.4 V supply. The switch, based upon the 1.8 V thinoxide devices with resistive body-floating and unit cell layout optimisati...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Wireless Engineering and Technology

دوره 2  شماره 

صفحات  -

تاریخ انتشار 2011