Limit analysis discussion of design methods for fracture of timber dowel joints loaded perpendicular to grain
نویسنده
چکیده
منابع مشابه
Load-carrying behaviour of steel-to-timber dowel connections
This paper details tests on steel-wood-steel connections with thin dowels carried out at the University of British Columbia in Vancouver, Canada. Connections configurations were selected in such a way that the influence of the main parameters such as dowel slenderness ratio, dowel strength, fastener spacing and end distance and the number of dowels could be studied. An important issue of the pa...
متن کاملReversed Cyclically Loaded Dowel-Type Fasteners
In contrast to nailed connections, little research has been done on bolted connections using a reversed cyclic loading scheme, although cyclic loading provides important information about energy absorption and damping properties, which is essential when analyzing seismic performance. Dowrick (1986) noted that the hysteretic characteristics for the primary connection of a subassembly govern its ...
متن کاملExploratory study of high-strength, low-cost through-bolt with cross-pipe and nut connections for square and roundwood timber frame construction
Through-bolt with dowel-nut connectors are commonly used in furniture where high strength mechanical connections are required. During early periods of use, dowel-nuts were often called barrel nuts (Eckelman 1977), but the term “dowel-nut” is more descriptive, and the author has referred to them as such in the above and all subsequent publications (Eckelman 1989, 1999; Eckelman and Erdil 2000). ...
متن کاملUnidirectionally, Laterally Loaded Dowel-Type Fasteners Multiple-Bolt Joints
For many years U.S. design codes modeled the design values of a multiple-bolt joint as the design value of a single-bolt connection multiplied by the number of bolts. The provisions were based on research conducted by Trayer (1932) who observed an equal distribution of load among bolts. This was despite the fact that research conducted as early as in the late 19 century suggested an uneven load...
متن کاملProperties of Double Dowel Joints Constructed of 2 Medium Density Fiberboard
Ming CHEN, Jianhua LYU 4 Associate professors, Department of Product Design, College of Forestry, Sichuan Agricultural 5 University, Chengdu 611130, China. [email protected] 6 Corresponding author: [email protected] 7 Received: May 14, 2017 8 Accepted: February 02, 2018 9 Posted online: February 05, 2018 10 11 ABSTRACT 12 The objective of this study is to determine optimum parameters for dou...
متن کامل