Laminar flow used as "liquid etch mask" in wet chemical etching to generate glass microstructures with an improved aspect ratio.
نویسندگان
چکیده
A new method of anisotropic etching an amorphous bulk material is proposed in this paper. Laminar flow is employed in this method to mask the flow of an etchant and is termed as "liquid etch mask". Since this mask has the physical properties of a liquid, it brings several advantages that could not be achieved by any kind of other etch mask in the solid phase. As a consequence, the aspect ratio of the glass channel could be improved to approximately 1 while in an inexpensive and convenient manner.
منابع مشابه
Factorial Experiment on Cmos - Mems Rie Post Processing
CMOS-MEMS is a promising approach to achieve integration of microelectromechanical structures with circuits by using foundry CMOS services coupled with post-CMOS processing. The most significant benefit is the low cost of manufacturing the mechanical structures with CMOS. We report suitable conditions for post-CMOS processing by reactive ion etching (RIE) to define the mechanical structures. Va...
متن کاملAnisotropic multi-step etching for large-area fabrication of surface microstructures on stainless steel to control thermal radiation
Controlling the thermal radiation spectra of materials is one of the promising ways to advance energy system efficiency. It is well known that the thermal radiation spectrum can be controlled through the introduction of periodic surface microstructures. Herein, a method for the large-area fabrication of periodic microstructures based on multi-step wet etching is described. The method consists o...
متن کاملWet-etching of structures with straight facets and adjustable taper into glass substrates.
Wet etching of glass by hydrofluoric acid is widely used in microfabrication, but is limited by the isotropic nature of the process that leads to rounded sidewalls and a 90 degrees angle between the etch front and the surface of the substrate. For many applications such as microvalving, or for further processing such as spin-coating, well controlled, gently sloping sidewalls are often preferred...
متن کاملA Highly Selective Low Pressure Inductively Coupled Plasma Etching Process for GaAs Using Photoresist Mask
GaAs etch characteristics like etch rate, etch profile sidewall angle, etch surface morphology and selectivity are studied as a function of Inductively Coupled Plasma (ICP) power and Cl2/BCl3 flow rate ratio in ICP at low pressure (<15mTorr) and low RF bias power (<100W) regime to achieve moderate GaAs etch rate with an-isotropic profiles and smooth surface morphology. The low pressure regime e...
متن کاملDeemo: a New Technology for the Fabrication of Microstructures
The recent innovations in dry etching make it a promising technology for the fabrications of micromoulds. The high aspect ratios, directional freedom, low roughness, high etch rates and high selectivity with respect to the mask material allow a versatile fabrication process of micromoulds for subsequent electroplating and embossing, as is demonstrated with the DEEMO process. DEEMO is an English...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Lab on a chip
دوره 9 14 شماره
صفحات -
تاریخ انتشار 2009