Impedance Matching Why Impedance Match ?
نویسندگان
چکیده
Also, the power-handling capacity of a transmission line is maximum when it is "flat", i.e., operating at low SWR. Lastly, it is important to be able to interconnect a number of different components into a system, and the only way that can be done reliably and predictably is by constraining the reflection coefficients of the various interfaces through impedance matching. Multiple reflections can result in group delay variations that can produce undesired intermodulation in broadband systems.
منابع مشابه
Transformer-Feedback Degenerated Low-Noise Amplifier
Owing to its well-known properties of possible power-noise match as well as superior noise performance, the inductively-degenerated low-noise amplifier is nowadays the most-widely used RF pre-amplifier topology. However, there is not much flexibility when setting the amplifier’s input impedance to match the source impedance, as for a given biasing condition, matching is achievable only for a pa...
متن کاملConcept of transformer-feedback degeneration of low-noise amplifiers
Owing to its well-known properties of possible power-noise match as well as superior noise performance, the inductively-degenerated low-noise amplifier is nowadays the most-widely used RF preamplifier topology. However, there is not much flexibility when setting the amplifier’s input impedance to match the source impedance, as for a given biasing condition, matching is achievable only for a par...
متن کاملImpedance Matching by Using a Multi-stub System
Nowadays lots of applications in telecommunications require a wide bandwidth to transmit more information and improve the quality on the transmission of this information. In order to guarantee this condition low losses systems are designed; these losses can be classified in dissipation losses and mismatch losses. There are different classic methods for impedance matching, but they reach the imp...
متن کاملAdaptive Impedance Matching to Compensate Mutual Coupling Effects on Compact MIMO Systems
Multiple-Input Multiple-Output (MIMO) systems promise higher data rates and better quality of service for wireless communications, by using multiple antennas at both the transmitter and receiver. However, applying MIMO technology at small portable wireless devices is faced with the problem of mutual coupling between antenna elements due to the limited space to put multiple antennas. It is shown...
متن کاملAdaptive Impedance Matching for Magnetically Coupled Resonators
For high quality factor magnetically coupled resonator wireless power systems, constant wireless power transfer efficiency can be achieved over a greater range and higher efficiency than an inductively coupled system. However, as the distance varies between two near-field resonators, the input and output impedances to the resonators change. Therefore, in order to achieve constant efficiency, th...
متن کامل