EXCESS HEAT IN MOLTEN SALTS OF (LiCl − KCl) + (LiD + LiF) AT THE TITANIUM ANODE DURING ELECTROLYSIS
نویسندگان
چکیده
The electrochemical cell and a technique for precision calorimetric measurements has been developed. Experiments with molten salts containing lithium deuteride were carried out. Calorimetric measurements made on the titanium anode during experiments. Measurements were made in an inert atmosphere of helium and in an atmosphere of deuterium at various density of an electrolysis current. Excess heat was obtained on the titanium anode in a deuterium atmosphere deuterium during electrolysis. An x-ray diffraction analysis was made on the used titanium anode. The analysis of the results obtained is discussed.
منابع مشابه
Direct electrochemical reduction of titanium-bearing compounds to titanium-silicon alloys in molten calcium chloride
Titanium-silicon alloys have been electrochemically extracted from the multi-component titanium compounds in molten calcium chloride electrolyte. Sintered pressed pellets of titanium-bearing compounds served as the cathode, and the electrochemical experiments were systematically carried out at 900 °C, 3.1 V and 1000 °C, 3.8 V using a graphite-based anode and an improved inert-oxygen-ion-conduct...
متن کاملElectro-deposition and re-oxidation of carbon in carbonate-containing molten salts.
The electrochemical deposition and re-oxidation of solid carbon were studied in CO3(2-) ion-containing molten salts (e.g. CaCl2-CaCO3-LiCl-KCl and Li2CO3-K2CO3) at temperatures between 500 and 800 °C under Ar, CO2 or N2-CO2 atmospheres. The electrode reactions were investigated by thermodynamic analysis, cyclic voltammetry and chronopotentiometry in a three-electrode cell under various conditio...
متن کاملHigh Temperature Phase Change Materials for Thermal Energy Storage Applications: Preprint
To store thermal energy, sensible and latent heat storage materials are widely used. Latent heat thermal energy storage (TES) systems using phase change materials (PCM) are useful because of their ability to charge and discharge a large amount of heat from a small mass at constant temperature during a phase transformation. Because high-melting-point PCMs have large energy densities, their use c...
متن کاملNovel waste printed circuit board recycling process with molten salt
The objective of the method was to prove the concept of a novel waste PCBs recycling process which uses inert, stable molten salts as the direct heat transfer fluid and, simultaneously, uses this molten salt to separate the metal products in either liquid (solder, zinc, tin, lead, etc.) or solid (copper, gold, steel, palladium, etc.) form at the operating temperatures of 450-470 °C. The PCB rec...
متن کاملNew Opportunities for Metals Extraction and Waste Treatment by Electrochemical Processing in Molten Salts
Molten salt electrolysis is a proven technology for the extraction of metals -all the world's primary aluminum is produced in this manner. The unique properties of molten salts also make them excellent media in which to treat a variety of forms of waste. Of special note in this regard is electrolysis in molten oxides, a concept put forward by the author, initially as a "clean technology" for pr...
متن کامل