Heat Transfer by Impingement of Circular Free-Surface Liquid Jets
نویسنده
چکیده
This paper reviews several aspects of liquid jet impingement cooling, focusing on research done in our lab at MIT. Free surface, circular liquid jet are considered. Theoretical and experimental results for the laminar stagnation zone are summarized. Turbulence effects are discussed, including correlations for the stagnation zone Nusselt number. Analytical results for downstream heat transfer in laminar jet impingement are discussed. Splattering of turbulent jets is also considered, including experimental results for the splattered mass fraction, measurements of the surface roughness of turbulent jets, and universal equilibrium spectra for the roughness of turbulent jets. The use of jets for high heat flux cooling is described briefly.
منابع مشابه
Heat Transfer under Double Turbulent Pulsating Jets Impinging on a Flat Surface
In this study, the numerical analysis of turbulent flow and heat transfer of double pulsating impinging jets on a flat surface has been investigated. The unsteady two-dimensional numerical solution for two similar and dissimilar jets was performed using the RNG k-ε model. The results showed that the RNG k-ε model has more satisfactory predictions of the Nusselt number distribution. Comparisons ...
متن کاملNumerical Investigation on Slot air Jet impingement Heat Transfer between Horizontal Concentric Circular Cylinders
A numerical study has been carried out for slot air jet impingement cooling of horizontal concentric circular cylinders. The slot air jet is situated at the symmetry line of a horizontal cylinder along the gravity vector and impinges on the bottom of the outer cylinder which is designated as θ=0°. The outer cylinder is partially opened at the top with a width of W=30mm and is kept at constant t...
متن کاملNozzle Geometry Effects in Liquid Jet Array Impingement
The use of impinging liquid jets in electronics thermal management is attracting some consideration due to their very high heat transfer coefficients, hot spot targeting capabilities and moderate hydraulic power requirements. In this investigation an experimental study of the cooling capabilities of impinging water jet arrays is presented. Of particular interest here is the influence that the i...
متن کاملCfd Simulation of round Impinging Jet and Comparison with Experimental Data
In this work, fluid dynamics of a turbulent round impinging jet has been studied using Computational Fluid Dynamics (CFD) and the results have been compared with experimental data from the literature. The fluid was water with density of 1000 kg/m 3 and the average velocity of the submerged jet was kept constant at 10.7 m/s while the liquid viscosity varied from 1 cP to 100 cP. Different turbule...
متن کاملEffect of Injection Parameters on Jet Array Impingement Heat Transfer
The purpose of the present study is to clarify the heat transfer characteristics with multiple jet impingement aiming at the highly efficient cooling performance. In the study, we investigated the effect of injection parameters on circular jet array impingement heat transfer. As we focus on interference among the adjacent impinging jets, tests are mainly conducted at the minimum crossflow condi...
متن کامل