Low Voltage, Low Power CMOS Bandgap References
نویسندگان
چکیده
منابع مشابه
طراحی مرجع ولتاژ زیر یک ولت قابل کاشت در بدن با دقت ppm/میکرومتر15 با استفاده از ترانزیستورهای ذاتی(Native)
Voltage references are crucial part of every circuit, providing a fixed voltage regardless of environmental parameters and device loading. Among several approaches proposed for designing voltage references, bandgap voltage references are the most common, but the bandgap voltage reference is bipolar in nature and does not show good stability when the supply voltage is small. Thus according to th...
متن کاملResistorless BJT bias and curvature compensation circuit at 3.4 nW for CMOS bandgap voltage references
A novel resistorless bipolar junction transistor (BJT) bias and curvature compensation circuit for ultra-low power CMOS bandgap voltage references (BGR) is introduced. It works in the nano-ampere current consumption range and under 1 V of power supply. The analytical behavior of the circuit is described, and simulation results for a 0.18 μm CMOS standard process are analysed. A junction voltage...
متن کاملOp-Amps and Startup Circuits for CMOS Bandgap References With Near 1-V Supply
The design of bandgap-based voltage references in digital CMOS raises several design difficulties, as the supply voltage is lower than the silicon bandgap in electron volts, i.e., 1.2 V. A current-mode architecture is used in order to address the main issues posed by the low supply, but the implementation of the operational amplifier and of dedicated startup circuits deserves some attention. Ev...
متن کاملSub-1-V-Output CMOS bandgap reference circuit with small area and low power consumption
In this paper, a new low-VDD CMOS bandgap reference circuit with small layout area and low power consumption is proposed. The proposed circuit delivering its output voltage below 1V has its Proportional-To-Absolute-Temperature (PTAT) term compensated by the Complementary-proportional-To-AbsoluteTemperature (CTAT) voltage thereby suppressing a change in its output voltage regardless of temperatu...
متن کاملA programmable CMOS bandgap voltage reference circuit using current conveyor
This paper presents a new structure of a bandgap circuit which can be programmed to get any desired output voltage. Unlike conventional bandgap circuits, the proposed bandgap circuit uses MOS transistors operating in subthreshold region instead of bipolar transistors to generate PTAT and IPTAT currents. Use of the current conveyor makes the circuit capable of being operated at lower supply volt...
متن کامل