Adaptive Control Design for a Synchronous Generator
نویسندگان
چکیده
The operating point of a power system changes to an unknown point with an unknown change in the mechanical input power. In this paper, a nonlinear adaptive controller is designed for excitation system of the generator based on the backstepping control technique, in order to achieve transient stability enhancement, in the presence of uncertainties in mechanical power. The designed controller guarantees the convergence of system states to new desired values corresponding to unknown mechanical power. A power system consisting of a synchronous generator connected to an infinite bus through a double circuit transmission line is used in control design and the simulation studies. Computer simulation verifies the effectiveness and the validity of the proposed control, considering faulted system with a clearance and change in network topology.
منابع مشابه
Application to Adaptive Control to Synchronous Machine Excitation
Self-tuning adaptive control technique has the advantage of being able to track the system operating conditions so that satisfactory control action can always be produced. Self-tuning algorithms can be implemented easily. Because the power systems are usually time varying non-linear systems and their parameters vary, adaptive controllers are very suitable for power systems. Characteristics of a...
متن کاملAdaptive Voltage-based Control of Direct-drive Robots Driven by Permanent Magnet Synchronous Motors
Tracking control of the direct-drive robot manipulators in high-speed is a challenging problem. The Coriolis and centrifugal torques become dominant in the high-speed motion control. The dynamical model of the robotic system including the robot manipulator and actuators is highly nonlinear, heavily coupled, uncertain and computationally extensive in non-companion form. In order to overcome thes...
متن کاملRobust Control of Encoderless Synchronous Reluctance Motor Drives Based on Adaptive Backstepping and Input-Output Feedback Linearization Techniques
In this paper, the design and implementation of adaptive speed controller for a sensorless synchronous reluctance motor (SynRM) drive system is proposed. A combination of well-known adaptive input-output feedback linearization (AIOFL) and adaptive backstepping (ABS) techniques are used for speed tracking control of SynRM. The AIOFL controller is capable of estimating motor two-axis inductances ...
متن کاملDesign of a Permanent-Magnet Synchronous Generator for a 2 MW Gearless Horizontal-Axis Wind Turbine According to its Capability Curves
Permanent-Magnet Synchronous Generators (PMSGs) exhibit high efficiency and power density, and have already been employed in gearless wind turbines. In the gearless wind turbines, due to the removal of the gearbox, the cogging torque is an important issue. Therefore, in this paper, at first, design of a Permanent-Magnet Synchronous Generator for a 2MW gearless horizontal-axis wind turbine, acco...
متن کاملAnalysis and Design of a Permanent-Magnet Outer-Rotor Synchronous Generator for a Direct-Drive Vertical-Axis Wind Turbine
In Permanent-Magnet Synchronous Generators (PMSGs) the reduction of cogging torque is one of the most important problems in their performance and evaluation. In this paper, at first, a direct-drive vertical-axis wind turbine is chosen. According to its nominal value operational point, necessary parameters for the generator is extracted. Due to an analytical method, four generators with differen...
متن کاملAdaptive Fuzzy Controller and Adaptive Self-Tuning Controller: Comparative Analysis for the Excitation Control of a Synchronous Generator
This paper presents a comparative study between an adaptive fuzzy controller and an adaptive selftuning controller with application to excitation control of a synchronous generator. The adaptive self-tuning controller is based on a dual action, obviously on control input, and also on reference signal. The proposed adaptive fuzzy controller includes a mechanism to adapt one of the tuning paramet...
متن کامل