Multicomponent wavefield characterization with a novel scanning laser interferometer.
نویسندگان
چکیده
The in-plane component of the wavefield provides valuable information about media properties from seismology to nondestructive testing. A new compact scanning laser ultrasonic interferometer collects light scattered away from the angle of incidence to provide the absolute ultrasonic displacement for both the out-of-plane and an in-plane components. This new system is tested by measuring the radial and vertical polarization of a Rayleigh wave in an aluminum half-space. The estimated amplitude ratio of the horizontal and vertical displacement agrees well with the theoretical value. The phase difference exhibits a small bias between the two components due to a slightly different frequency response between the two processing channels of the prototype electronic circuitry.
منابع مشابه
Incident Wave Removal for Defect Enhancement in Acoustic Wavefield Imaging
The method of Acoustic Wavefield Imaging (AWI) offers many advantages over conventional ultrasonic techniques for nondestructive evaluation, and also provides a means of incorporating fixed ultrasonic sensors used for structural health monitoring into subsequent inspections. AWI utilizes these fixed sensors as wave sources and an externally scanned ultrasonic transducer (or laser interferometer...
متن کاملElectrically switchable cylindrical Fresnel lens based on holographic polymer-dispersed liquid crystals using a Michelson interferometer
Fabricating an electrically switchable cylindrical Fresnel lens based on holographic polymer-dispersed liquid crystals (H-PDLC) using a Michelson interferometer is reported. Simplicity of the method and possibility of fabricating different focal length lenses in a single set up are among the advantages of the method. It is demonstrated that the Fresnel structured zone plate acts as a cylindrica...
متن کاملLocal Guided Wavefield Analysis for Characterization of Delaminations in Composites
Delaminations in composite laminates resulting from impact events may be accompanied by minimal indication of damage at the surface. As such, inspection techniques are required to ensure defects are within allowable limits. Conventional ultrasonic scanning techniques have been shown to effectively characterize the size and depth of delaminations but require physical contact with the structure. ...
متن کاملFrequency-wavenumber Domain Filtering for Improved Damage Visualization
This paper presents a technique for the analysis of full wavefield data in the wavenumber/frequency domain as an effective tool for damage detection, visualization and characterization. Full wavefield data contain a wealth of information regarding the space and time variation of propagating waves in damaged structural components. Such information can be used to evaluate the response spectrum in...
متن کاملEffect of Cooling on Bending Angle and Microstructure in Laser Tube Bending with Circumferential Scanning
Laser tube bending is a flexible forming process. Two irradiation methods of axial and circumferential scanning are generally used to form metal tubes. The two most important disadvantages of circumferential scanning are its lower bending angle and the time interval required between each scan for cooling purpose. In this research, a novel cooling strategy during laser tube bending with circumfe...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- The Review of scientific instruments
دوره 81 7 شماره
صفحات -
تاریخ انتشار 2010