Paper-Based Electrodeposition Chip for 3D Alginate Hydrogel Formation
نویسندگان
چکیده
Hydrogel has been regarded as one significant biomaterial in biomedical and tissue engineering due to its high biocompatibility. This paper proposes a novel method to pattern calcium alginate hydrogel in a 3D way via electrodeposition process based on a piece of paper. Firstly, one insulating paper with patterned holes is placed on one indium tin oxide (ITO) glass surface, which is put below another ITO glass. Then, 1% sodium alginate solution with 0.25% CaCO3 nano particles is filled between these two glasses. In the bottom glass, patterns of electrodes followed patterns of holes on the insulating layer. Hydrogel forms on patterned electrodes when electrochemical potential is applied due to electrodeposition. The experiments demonstrate that the pattern of alginate hydrogels follows the pattern of electrodes exactly. In addition, the hydrogel’s height is controllable by applied potential and reaction time. An equivalent circuit model and a hydrogel growth model have been built to predict the electrodeposition current and hydrogel’s growth. This method for gel formation is easy and cheap since the main material is one piece of insulated paper, which provides an easy and controllable method for 3D hydrogel patterning.
منابع مشابه
Three-Dimensional Calcium Alginate Hydrogel Assembly via TiOPc-Based Light-Induced Controllable Electrodeposition
Artificial reconstruction of three-dimensional (3D) hydrogel microstructures would greatly contribute to tissue assembly in vitro, and has been widely applied in tissue engineering and drug screening. Recent technological advances in the assembly of functional hydrogel microstructures such as microfluidic, 3D bioprinting, and micromold-based 3D hydrogel fabrication methods have enabled the form...
متن کاملAlginate gel microwell arrays using electrodeposition for three-dimensional cell culture.
In this study, we developed a novel method for fabricating microwell arrays constructed from alginate gels, and the alginate gel microwells were used for three-dimensional (3D) cell culture. The alginate gel microwells were fabricated on a patterned ITO electrode using alginate gel electrodeposition. Embryonic stem (ES) cells or hepatocellular carcinoma cells (HepG2) were cultured in the algina...
متن کاملStereolithographic printing of ionically-crosslinked alginate hydrogels for degradable biomaterials and microfluidics.
3D printed biomaterials with spatial and temporal functionality could enable interfacial manipulation of fluid flows and motile cells. However, such dynamic biomaterials are challenging to implement since they must be responsive to multiple, biocompatible stimuli. Here, we show stereolithographic printing of hydrogels using noncovalent (ionic) crosslinking, which enables reversible patterning w...
متن کاملHydrogel-laden paper scaffold system for origami-based tissue engineering.
In this study, we present a method for assembling biofunctionalized paper into a multiform structured scaffold system for reliable tissue regeneration using an origami-based approach. The surface of a paper was conformally modified with a poly(styrene-co-maleic anhydride) layer via initiated chemical vapor deposition followed by the immobilization of poly-l-lysine (PLL) and deposition of Ca(2+)...
متن کاملDynamic microarray system with gentle retrieval mechanism for cell-encapsulating hydrogel beads.
This paper describes a selective retrieval method for arrayed monodisperse hydrogel beads containing cells. We implemented modifications such as: (i) the incorporation of cavities as nucleation sites, (ii) indirect retrieval using bubble powered jets and (iii) the use of low boiling point fluid in our device to realize a gentle optical-based retrieval method. Parametric studies confirmed that t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Micromachines
دوره 6 شماره
صفحات -
تاریخ انتشار 2015