Formation of thermal vacancies on the Si sublattice of the intermetallic compound MoSi2.
نویسندگان
چکیده
For a detailed understanding of high-temperature processes in complex solids the identification of the sublattice on which thermal defects are formed is of basic interest. Theoretical studies in intermetallic compounds favor a particular sublattice for thermal vacancy formation. In the present study we detect in ordered MoSi2 thermal vacancies with a low formation enthalpy of H(F)(V)=(1.6+/-0.1) eV, and we succeed in showing by experimental and theoretical efforts that they are preferentially formed on the Si sublattice. By these data self-diffusion in MoSi2 can be understood.
منابع مشابه
Thermodynamic analysis of nanocrystalline solid solution formation in the W-Co-Si ternary system by mechanical alloying
Co3W2Si intermetallic compound was synthesized by mechanical alloying (MA) of W, Co and Si elemental powder mixtures. The phase composition of the milled products was evaluated by X-ray diffraction (XRD) analysis. Morphological evolutions were characterized by transmission electron microscopy (TEM). The results showed that high energy ball milling performed in the present work led to the format...
متن کاملارزیابی فازی ترکیبات آلیاژی و کامپوزیتی شده ی دی سیلیساید مولیبدن با آلومینیوم و کاربید تیتانیوم
In this study, pure powders such as molybdenum, silicon, aluminum and titanium carbide were utilized to produce MoSi2 compound, MoSi2 /20 Vol % TiC composite, MoSi2-x Al alloyed compound and MoSi2-x Al/20 Vol % TiC alloyed composite. The initial powders were mixed in specified ratios, and then, were activated by mechanical milling. Milled powders were compacted, synthesized and sintered in the...
متن کاملEffect of Welding Heat Input on the Intermetallic Compound Layer and Mechanical Properties in Arc Welding-brazing Dissimilar Joining of Aluminum Alloy to Galvanized Steel
The effect of weld heat input on the formation of intermetallic compound (IMCs) layer during arc welding–brazing of aluminium and steel dissimilar alloys, was investigated through both finite element method (FEM) numerical simulations and experimental measurements. The results of FEM analysis as well as welding experiments indicated that increasing weld heat input increases the thickness of IMC...
متن کاملInvestigation of composite powder synthesis (Al2O3-WXSiY-WXBY) in aluminothermic combustion system (Al+B2O3+Si+WO3) using thermal analysis
Composites that are including silicide of tungsten and boride of tungsten intermetallic compound have properties such as high hardness, relatively good thermal shock, chemical stability and high strength at high temperature. The purpose of this investigation is evaluation of phase and microstructure of alumina base composite reinforced by boride and silicide of tungsten in three systems 1-Al+...
متن کاملANALYTICAL DATA FOR NiO REDUCTION AND Al3Ni2 INTERMETALLIC COMPOUND FORMATION
In this research, the nickel oxide was dissolved in cryolite at temperatures of 880, 940 and 1000°C. In order to reduce the nickel oxide, aluminum was added to the salt. Simultaneously the nickel oxide was reduced and Al3Ni2 intermetallic compound was formed. In the duration intervals of 2.5-40 minutes samples of the salt and metallic phases were taken. The variation of the nickel content in me...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Physical review letters
دوره 92 15 شماره
صفحات -
تاریخ انتشار 2004