Designing Axial Flow Fan for Flow and Noise
نویسندگان
چکیده
A comprehensive finite element methodology is developed to predict the compressible flow performance of a non-symmetric 7-blade axial flow fan, and to quantify the source strength and sound pressure levels at any location in the system. The acoustic and flow performances of the fan are predicted simultaneously using a computational aero-acoustic technique combining transient flow analysis and noise propagation. The calculated sound power levels compare favorably with the measured sound power data per AMCA 300-96 code.
منابع مشابه
Effect of Blade Design Parameters on Air Flow through an Axial Fan
The objective of this paper is the numerical study of the flow through an axial fan and examining the effects of blade design parameters on the performance of the fan. The axial fan is extensively used for cooling of the electronic devices and servers. Simulation of the three-dimensional incompressible turbulent flow was conducted by numerical solution of the (RANS) equations for a model. The S...
متن کاملNumerical study on the acoustic field of a centrifugal fan and the tonal noise sources
The widespread use of squirrel cage fans, especially in ventilation and home and industrial environments, has led to the formation of many research efforts to improve performance and reduce the sound produced by this type of fan. In the literature, the most important factor in generating sound in this category of fans is the confrontation between the rotor exit flow and the volute of the fan. I...
متن کاملInfluence of Chord Lengths of Splitter Blades on Performance of Small Axial Flow Fan
On the basis of small axial fan with five blades, 6 types of small axial flow fans with different chord lengths splitter blades were designed. Numerical simulation of 6 fan models with splitter blades and prototype fan were done by using Fluent. Based on the obtained simulation results, internal flow characteristics and aerodynamic noise were analyzed and compared. It indicates that: splitter b...
متن کاملFlows in Duct for Axial Fan
Axial flow fan has been used for large amount of flow rate in air handling units of industrial application fields. The fan involves a shrouding duct as flow guidance for uniform flows. Pressure difference between before and ahead of rotating blades causes the flows movements. The case where the flow resistance such as a heat exchanger is located prior to the rotors is typical in-field model for...
متن کاملCFD Modeling of a Radiator Axial Fan for Air Flow Distribution
The fluid mechanics principle is used extensively in designing axial flow fans and their associated equipment. This paper presents a computational fluid dynamics (CFD) modeling of air flow distribution from a radiator axial flow fan used in an acid pump truck Tier4 (APT T4) Repower. This axial flow fan augments the transfer of heat from the engine mounted on the APT T4. CFD analysis was perform...
متن کامل