The Load Transfer Model
نویسندگان
چکیده
منابع مشابه
Evaluating the Performance of Dowel in PCC Pavement of Roads using ABAQUS Finite Element Software
In Portland Cement Concrete (PCC) pavement of the roads, dowels bar transfers vehicle loading to the unloaded slab. Load Transfer Efficiency (LTE) is used to evaluate dowel bars in PCC pavement. This parameter is defined as the vertical displacement ratio of the loaded slab versus the unloaded slab. In this study, the impact of effective factors (friction coefficient between dowel and concrete ...
متن کاملA Multi-Year Scenario-Based Transmission Expansion Planning Model Incorporating Available Transfer Capability
This paper presents a multi-year scenario-based methodology for transmission expansion planning (TEP) in order to enhance the available transfer capability (ATC). The ATC is an important factor for all players of electricity market who participate in power transaction activities and can support the competition and nondiscriminatory access to transmission lines among all market participants. The...
متن کاملAnalysis of Roll Control System to Eliminate Liquid Sloshing Effect on Lateral Stability of an Articulated Vehicle Carrying Liquid
In this paper, the consequences of filled volume on the transient lateral dynamic and stabilities boundaries displacement of an articulated vehicle carrying liquid is investigated. First, a sixteen-degrees-of-freedom nonlinear dynamic model of an articulated vehicle is developed then, using TruckSim software the model is validated. Next, the dynamic interaction of the fluid cargo with the vehic...
متن کاملLiquid Sloshing Effect Analysis on Lateral Dynamics of an Articulated Vehicle Carrying Liquid for Various Filled Volumes
In this paper, the consequences of filled volume on the transient lateral dynamic and stabilities boundaries displacement of an articulated vehicle carrying liquid is investigated. First, a sixteen-degrees-of-freedom nonlinear dynamic model of an articulated vehicle is developed. Then, the model is validated by using TruckSim software. Next, the dynamic interaction of the fluid cargo with the v...
متن کاملFlow Analysis Heat and Mass Transfer in a Room
This reports the study on the flow behaviour, heat transfer and contamination distribution in a room. For this purpose the 3-D incompressible Navier-Stokes equations, energy equation and a mass transfer equation which model the concentration of contamination have been applied. For turbulence simulation the two equation standard k- turbulence model was employed. By means of SIMPLE algorithm the...
متن کاملStress Transfer Modeling in CNT Reinforced Composites using Continuum Mechanics (TECHNICAL NOTE)
Because of the substantial difference in stiffness between matrix and nanotube in CNT composite, the stress transfer between them controls their mechanical properties. This paper investigates the said issue, analytically and numerically, in axial load using representative volume element (RVE). The analytical model was established based on the modified Cox’s shear lag model with the use of some ...
متن کامل