Combinatorial Investigation of Intermetallics Using Electron - Beam Deposition
نویسنده
چکیده
Title of Dissertation: Combinatorial Investigation of Intermetallics Using Electron-beam Deposition Hiroyuki Oguchi, Doctor of Philosophy, 2008 Directed By: Professor Ichiro Takeuchi, Materials Science & Engineering We have systematically studied subtle changes in physical properties of intermetallics using the combinatorial strategy where a large number of samples with systematically changed parameters can be rapidly studied. We have developed a new combinatorial electron-beam (e-beam) deposition chamber which allows us to perform layer-by-layer deposition as well as co-deposition. For my thesis, two particular topics of significant technological impacts involving intermetallic systems were investigated. They are exchange-coupled soft/hard magnetic bilayer systems and hydrogen storage Mg–(transiton metal) (TM) binary systems. The first topic is discussed in Chapter 2 – Chapter 4, and the second topic is duscussed in Chapter 5 – Chapter 7. Summary of the thesis work and future plans are discussed in Chapter 8. We have studied the effect of magnetic parameters of the soft layer on the exchange coupling behavior of soft/hard magnetic bilayer systems. The magnetic parameters of the soft layer were systematically changed in a combinatorial manner by changing the composition of the soft layer. The exchange coupling behavior was monitored by M-H hysteresis loops taken by a magneto-optical Kerr effect (MOKE) measurement set up. The MOKE M-H hysteresis loops successfully delineated the exchange coupling behavior dependence on the magnetic parameters. We have also studied the effect of the crystallinity and grain-texturing of the hard layer on the exchange coupling behavior of hard/soft magnetic bilayer systems. The crystallinity and the degree of grain-texturing were controlled by growth temperature and the post-annealing process of the hard layer. The MOKE M-H hysteresis loops successfully revealed that attaining a single phase, single orientation hard layer is the key to achieving a good exchange coupling behavior. We have developed a new infrared (IR) imaging set up to perform highthroughput screening of hydrogen storage properties of Mg-TM systems. In order to demonstrate the utility of the set up, we studied promising Mg-TM binary systems. We have fabricated Mg-TM binary composition spread thin films using the combinatorial e-beam chamber. For each composition, IR intensity as a function of measurement time were monitored by analyzing images collected continuously and periodically during measurements. The change in IR intensity curves successfully gave systematic trends in hydrogen absorption/desorption properties of Mg-TM composition spread thin films. We have established a novel way to use an IR imaging and succeeded to measure propagation of hydride formation from the top of hydrogen storage thin film. IR images of thickness gradient Mg0.95Ti0.05 thin films enabled us to directly determine the propagation of the hydride formation front quantitatively. COMBINATORIAL INVESTIGATION OF INTERMETALLICS USING ELECTRON-BEAM DEPOSITION
منابع مشابه
Band-Gap Tuning Of Electron Beam Evaporated Cds Thin Films
The effect of evaporation rate on structural, morphological and optical properties of electron beam evaporated CdS thin films have been investigated. CdS thin film deposited by electron beam evaporation method in 12nm/min and 60nm/min evaporation rates on glass substrates. X-ray diffraction, scanning electron microscopy, UV-Vis-NIR spectroscopy and Atomic Force Microscopy were used to character...
متن کاملSimulation of electron transport during electron-beam-induced deposition of nanostructures
We present a numerical investigation of energy and charge distributions during electron-beam-induced growth of tungsten nanostructures on SiO2 substrates by using a Monte Carlo simulation of the electron transport. This study gives a quantitative insight into the deposition of energy and charge in the substrate and in the already existing metallic nanostructures in the presence of the electron ...
متن کاملInvestigation of Physical Properties of e-Beam Evaporated CdTe Thin Films for Photovoltaic Application
CdTe thin films with 2.8 µm thickness were deposited by electron beam evaporation method. X-ray diffraction, scanning electron microscopy, UV-Vis-NIR spectroscopy and atomic force microscopy (AFM) were used to characterize the films. The results of AFM analysis revealed that the CdTe films have uniform surface. CdTe thin films were heat-treated by SnCl2 solution. Structural analysis using XRD s...
متن کاملاثر حضور نانوخوشههای مس به عنوان زیرلایه بر خواص بلوری و نوری لایه دیاکسیدتیتانیوم
Two 10 and 20nm samples of Cu nano-cluster were grown on quartz substrates with a thickness of by electron beam deposition method. Nanolayers of titanium dioxide with a thickness of 300 nm were deposited on these Cu nano-cluster layers. For comparison، a layer of titanium dioxide with a thickness of 300 nm was also coated on quartz substrate. All coatings were conducted using electron-beam phys...
متن کاملInfluence of Ni Deposition and Subsequent N+ Ion Implantation at Different Implantation Energies on Nano-Structure and Corrosion Behavior of 316 Stainless Steels
Nickel films of 300 nm thickness were deposited by electron beam evaporation at room temperature on 316 stainless steels. Corrosion studies of Ni coated 316 SS have been performed after N+ ion implantation at different energies of 20, 40, 60 and 80 keV. The structure and surface morphology of the films were evaluated using X-ray diffraction (XRD), atomic force microscope (AFM) an...
متن کامل