A 2D FE model of the heart demonstrates the role of the pericardium in ventricular deformation.

نویسندگان

  • Carol A Gibbons Kroeker
  • Samer Adeeb
  • John V Tyberg
  • Nigel G Shrive
چکیده

During pulmonary artery constriction (PAC), an experimental model of acute right ventricular (RV) pressure overload, the interventricular septum flattens and inverts. Finite element (FE) analysis has shown that the septum is subject to axial compression and bending when so deformed. This study examines the effects of acute PAC on the left ventricular (LV) free wall and the role the pericardium may play in these effects. In eight open-chest anesthetized dogs, LV, RV, aortic, and pericardial pressures were recorded under control conditions and with PAC. Model dimensions were derived from two-dimensional echocardiography minor-axis images of the heart. At control (pericardium closed), FE analysis showed that the septum was concave to the LV; stresses in the LV, RV, and septum were low; and the pericardium was subject to circumferential tension. With PAC, RV end-diastolic pressure exceeded LV pressure and the septum inverted. Compressive stresses developed circumferentially in the septum out to the RV insertion points, forming an arch-like pattern. Sharp bending occurred near the insertion points, accompanied by flattening of the LV free wall. With the pericardium open, the deformations and stresses were different. The RV became much larger, especially with PAC. With PAC, the arch-like circumferential stresses still developed in the septum, but their magnitudes were reduced, compared with the pericardium-closed case. There was no free wall inversion and flattening was less. From these FE results, the pericardium has a significant influence on the structural behavior of the septum and the LV and RV free walls. Furthermore, the deformation of the heart is dependent on whether the pericardium is open or closed.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Evaluating the Effect of Dissipated Viscous Energy of a Rolling Tire on Stress, Strain and Deformation Fields Using an Efficient 2D FE Analysis

The dissipated energy from periodic deformation is regarded as the main reason for heat generation and temperature rise inside the tire domain. However, the mechanical behavior of rubber parts is highly temperature dependent. In most performed investigations, the influence of thermal effects on stress/ deformation fields of pneumatic tires is ignored and just temperature distribution is conside...

متن کامل

Analysis of Laminated Soft Core Sandwich Plate Having Interfacial Imperfections by an Efficient C0 FE Model

An efficient C0 continuous two dimensional (2D) finite element (FE) model is developed based on a refined higher order shear deformation theory (RHSDT) for the static analysis of soft core sandwich plate having imperfections at the layer interfaces. In this (RHSDT) theory, the in-plane displacement field for the face sheets and the core is obtained by superposing a globally varying cubic displa...

متن کامل

Preconditioning effects of oxytocin in reducing cardiac arrhythmias in a rat heart regional ischemia-reperfusion model

Abstract Introduction: Occurrence of cardiac arrhythmias and myocardial infarction are two main deleterious events that are caused by ischemia-reperfusion (IR) injury in the heart. Cardiac preconditioning represents the most potent method of rescuing heart tissue from undergoing irreversible ischemic damage. The aim of the present study was to evaluate oxytocin (OT) cardioprotective effect...

متن کامل

Experimental and Numerical Investigation of the Performance of Automotive Adhesively Bonded Crash Box Beams Under Transverse Loading

The aim of the study was to examine the deformation modes and also degradation of an adhesively bonded rectangular cross section beam used in the automotive body structure. The study included: (1) performing new experimental investigations on the three-point bend behavior of a rectangular cross section beam made by adhesive bonding method. (2) developing a finite element (FE) model to predict t...

متن کامل

Effect of Fe additive on plastic deformation for crush-boxes with closed-cell metal foams, Part I: Al-composite foam compression response

AbstractIn this paper, we investigate effect of Fe–intermetallic compounds on plastic deformation of closed-cell composite Aluminum Foam as filler of thin-walled tubes. However, deformation of the Aluminum foam-filled thin-walled tubes as crushed-box will be presented in Part (II). Composite foams of AlSi7SiC3 and AlSi7SiC3-(Fe) as closed cell were synthesized by powder metallurgy foaming metho...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • American journal of physiology. Heart and circulatory physiology

دوره 291 5  شماره 

صفحات  -

تاریخ انتشار 2006