Paralleled DC-DC Power Converters Sliding Mode Control with Dual Stages Design
نویسندگان
چکیده
This paper proposes the new cascaded series parallel design for improved dynamic performance of DC-DC buck boost converters by a new Sliding Mode Control (SMC) method. The converter is controlled using Sliding Mode Control method that utilizes the converter’s duty ratio to determine the skidding surface. System modeling and simulation results are presented. The results also showed an improved overall performance over typical PID controller, and there was no overshoot or settling time, tracking the desired output nicely. Improved converter performance and robustness were expected.
منابع مشابه
SLIDING MODE CONTROL BASED ON FRACTIONAL ORDER CALCULUS FOR DC-DC CONVERTERS
The aim of this paper is to design a Fractional Order Sliding Mode Controllers (FOSMC)for a class of DC-DC converters such as boost and buck converters. Firstly, the control lawis designed with respect to the properties of fractional calculus, the design yields an equiv-alent control term with an addition of discontinuous (attractive) control law. Secondly, themathematical proof of the stabilit...
متن کاملDesign and Implementation of a Constant Frequency Sliding Mode Controller for a Luo Converter
In this study, a robust controller for voltage regulation of the POESLL converter worked in continuous conduction mode is presented. POESLL converter is a DC/DC converter with a high voltage gain. DC/DC converters are used in telecommunication systems, power sources and industrial applications. Owing to the switching operation, the structure of the POESLL converter is highly non-linear. In addi...
متن کاملEfficient low-voltage ride-through nonlinear backstepping control strategy for PMSG-based wind turbine during the grid faults
This paper presents a new nonlinear backstepping controller for a direct-driven permanent magnet synchronous generator-based wind turbine, which is connected to the power system via back-to-back converters. The proposed controller deals with maximum power point tracking (MPPT) in normal condition and enhances the low-voltage ride-through (LVRT) capability in fault conditions. In this method, to...
متن کاملPS 1-27 : An Evaluation of the Practicality of Sliding Mode Controllers in DC-DC Converters and Their General Design Issues
This paper examines the practical design issues of sliding mode controllers as applied to the control of DC– DC converters. A comprehensive review of the relevant literature is first provided. Major problems that prevent the use of sliding mode control in DC–DC converter for industrial applications and their possible solutions are discussed. Performance of sliding mode control is compared with ...
متن کاملCurrent-mode BiCMOS sliding-mode controller circuit for AC signal generation in switching power DC-DC converters
This communication describes the design of a microelectronic BiCMOS analog circuit, intended to be applied to the sliding-mode control of switching DC-DC power converters for the application of generating a sinusoidal signal with externally adjustable amplitude, frequency and offset. The circuit implements a sliding law over a nonlinear autonomous switching surface. The proposal of this analog ...
متن کامل