Formation and Characterization of Inkjet-Printed Nanosilver Lines on Plasma-Treated Glass Substrates

نویسندگان

  • Jae-Sung Kwon
  • Dong Jun Lee
  • Je Hoon Oh
چکیده

In this study, we investigated geometrical characteristics of the inkjet-printed lines with non-zero receding contact angle (CA) on plasma-treated substrates in terms of various printing variables and analyzed the fluidic behavior and hydrodynamic instability involved in the line formation process. The printing variables included surface energy, droplet overlap ratio, printing frequency, a number of ink droplets, substrate temperature and printing procedures. For the study, a colloidal suspension containing 56 wt % silver nanoparticles in tetradecane solvent was used as a printing ink. It has electrical resistivity of 4.7 μΩ·cm. The substrates were obtained by performing a plasma enhanced chemical vapor deposition (PECVD) process with C4F8 and O2 under various treatment conditions. As results of the experiments, the surface shape and pattern of the inkjet-printed Ag lines were dominantly influenced by the surface energy of the substrates, among the printing variables. Accordingly even when the receding CA was non-zero, bulging instability of the lines occurred forming separate circular patterns or regular bulges connected by ridges. It is a new finding of this study, which is completely different with the bulging instability of inkjet lines with zero receding CA specified by previous researches. The bulging instability decreased by increasing surface temperature of the substrates or employing interlacing procedure instead of continuous procedure for printing. The interlacing procedure also was advantageous to fabricate thick and narrow Ag lines with well-defined shape through overprinting on a hydrophobic substrate. These results will contribute greatly to not only the production of various printed electronics containing high-aspect-ratio structures but also the improvement of working performance of the devices.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Inkjet printing of single-walled carbon nanotubes and electrical characterization of the line pattern.

Single-walled carbon nanotubes (SWCNTs) were patterned using inkjet printing. To make the uniform networks of dropped SWCNTs, the effects of substrate heating, surface hydrophilicity of the substrate and the jetting process were investigated. Circuit diagrams including holes, lines and curves were printed on glass and polymer substrates, and the conductive lines were printed on a glass substrat...

متن کامل

Silver Nanoparticles Stabilized by Nitrocellulose as Low Conversion Temperature Precursors for Inkjet-Printed Electronic Circuits

Liquid-based inkjet printing is considered as a constructive (rather than destructuve) low-cost technique for printed circuit board fabrication. A convenient way of depositing silver films and lines using inkjet technology is to generate silver nanoparticles (AgNP) that can be dispersed and stabilized in solutions, processed into desired patterns and subsequently annealed. To avoid the aggregat...

متن کامل

Effect of Substrates on the Dynamic Properties of Inkjet-Printed Ag Thin Films

The dynamic properties of inkjet-printed Ag thin films on flexible substrates were measured using flexural wave propagation. The Ag nanoparticle suspension was inkjet-printed on polyimide (PI), silicon wafer, and glass. The effects of flexible substrates on the dynamic properties of the films were investigated. Beam-shaped Ag-printed substrates were fabricated by pico-second laser pulse cutting...

متن کامل

Improving Quality of Inkjet Printed Metal Nano-Particle Conductors

During the last couple of years several ink manufacturers have presented metal nano-particle inks for inkjet printing. These inks provide low resistances on plastic and paper substrates, thus enabling manufacturing of high-conductivity conductors that could be used in circuit boards. Inkjet printing of a commercial silver nano-particle ink on paper and plastic substrates has been investigated. ...

متن کامل

A comparative study of two conductive inkjet inks for fabrication of RF circuit structures

Two commercially available silver inks were inkjet printed to fabricate the seed tracks (seed layers) of radio frequency (RF) circuit structures on a high frequency substrate material. One of them is a nanoparticle based ink, and the other, a non-particle based organic silver complex ink. Subsequent to printing, these seed layers were copper plated using an electroless copper plating process, t...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2018