Enhancement of the dynamic buckling load for a plate by using piezoceramic actuators
نویسندگان
چکیده
We consider geometric and material nonlinearities when studying numerically the transient three-dimensional elastic deformations of a plate with piezoceramic elements perfectly bonded to its top and bottom surfaces, and analyze the effect of the shape and the size of the piezoceramic actuators on increasing the buckling load of the plate. The applied compressive edge load is assumed to increase linearly with time and the plate is taken to have buckled when the maximum transverse deflection at a point equals three times the plate’s thickness. (Some figures in this article are in colour only in the electronic version)
منابع مشابه
Buckling Analysis of FG Plate with Smart Sensor/Actuator
In this paper, the active buckling control of smart functionally graded (FG) plates using piezoelectric sensor/actuator patches is studied. A simply supported FG rectangular plate which is bonded with piezoelectric rectangular patches on the top and/or the bottom surface(s) as actuators/sensors is considered. When a constant electric charge is imposed, the governing differential equations of mo...
متن کاملMechanical Buckling of FG Saturated Porous Rectangular Plate with Piezoelectric Actuators
In this study buckling analysis of solid rectangular plate made of porous material bounded with the layers of piezoelectric actuators in undrained condition is investigated. Porous material properties vary through the thickness of plate with a specific function. Distributing of the pores through the plate thickness is assumed to be the nonlinear nonsymmetric distribution. The ...
متن کاملDifferential Quadrature Method for Dynamic Buckling of Graphene Sheet Coupled by a Viscoelastic Medium Using Neperian Frequency Based on Nonlocal Elasticity Theory
In the present study, the dynamic buckling of the graphene sheet coupled by a viscoelastic matrix was studied. In light of the simplicity of Eringen's non-local continuum theory to considering the nanoscale influences, this theory was employed. Equations of motion and boundary conditions were obtained using Mindlin plate theory by taking nonlinear strains of von Kármán and Hamilton's principle ...
متن کاملOn the Buckling the Behavior of a Multiphase Smart Plate based on a Higher-order Theory
Magneto-electro-elastic materials are multiphase smart materials that exhibit coupling among electrical, magnetic and mechanical energy fields. Due to this ability, they have been the topic of numerous research in the past decade. In this paper, buckling behavior of a multiphase magneto-electro-elastic rectangular plate with simply supported boundary conditions is investigated, based on Reddy’s...
متن کاملBiaxial Buckling and Bending of Smart Nanocomposite Plate Reinforced by CNTs using Extended Mixture Rule Approach
In this research, the buckling and bending behaviour of smart nanocomposite plate reinforced by single- walled carbon nanotubes (SWCNTs) under electro-magneto-mechanical loadings is studied. The extended mixture rule approach is used to determine the elastic properties of nanocomposite plate. Equilibrium equations of smart nanocomposite plate are derived using the Hamilton’s principle based on ...
متن کامل