Simulation and Performance Analysis of Parallel Resonant Inverter for Electronic Ballast Application
نویسندگان
چکیده
The class Φ2 inverter is a new switched mode type of resonant inverter. This inverter is applicable for very high frequency application. In this paper, it proposes class Φ2 inverter reduced the voltage stress, and improve the dynamic response. The class E resonant inverter is not suitable for high frequency application, because it produce high voltage stress across the switch. The suitable ballast and parallel resonant tank is prepared for class Φ2 inverter. By Comparingwith class E inverter, the class Φ2 has more dynamic response and low switching voltage losses.
منابع مشابه
Voltage-fed quasi-resonant LCrCdc PWM soft switching inverter with a constant-frequency for electronic ballast applications
An improved topology of a voltage-fed quasi-resonant soft switching LCrCdc series-parallel half bridge inverter with a constant-frequency for electronic ballast applications is proposed in this paper. This new topology introduces a low-cost solution to reduce switching losses and circuit rating to achieve high-efficiency ballast. Switching losses effect on ballast efficiency is discussed throug...
متن کاملVoltage-fed quasi-resonant LCrCdc PWM soft switching inverter with a constant-frequency for electronic ballast applications
An improved topology of a voltage-fed quasi-resonant soft switching LCrCdc series-parallel half bridge inverter with a constant-frequency for electronic ballast applications is proposed in this paper. This new topology introduces a low-cost solution to reduce switching losses and circuit rating to achieve high-efficiency ballast. Switching losses effect on ballast efficiency is discussed throug...
متن کاملEnergy Recovery Soft Switching Improved Efficiency Half Bridge Inverter for Electronic Ballast Applications
An improved topology of a voltage-fed quasi-resonant soft switching LCrCdc series-parallel half bridge inverter with a constant-frequency for electronic ballast applications is proposed in this paper. This new topology introduces a low-cost solution to reduce switching losses and circuit rating to achieve high-efficiency ballast. Switching losses effect on ballast efficiency is discussed throug...
متن کاملIntegrated Forward Half-Bridge Resonant Inverter as a High-Power-Factor Electronic Ballast
Abstract.A novel single-stage high-power-factor electronic ballast obtained from the integration of a forward dc-to-dc converter and a half-bridge resonant inverter is evaluated in this paper. The Forward converter is operated in discontinuous conduction mode and constant frequency providing an input power factor high enough to satisfy present standard requirements. The operation of the propose...
متن کاملA MHz Electronic Ballast for Automotive-Type HID Lamps
The compatibility of the Current Sourcing Push Pull Resonant Inverter (CS-PPRI) with the driving requirements of HID lamps designated for automotive headlight applications was investigated theoretically, by simulation and experimentally. The study reveals that a based ballast (CS-PPRI) complies with the automotive requirement of very fast warm up. The experimental ballast was run under Zero Vol...
متن کامل